Tailpiece Operations Checklist
YYY_MM_DD-Sonowood
Name
First Name
Last Name
Tool Check Completed
Yes
No
Tool Checklist
https://form.jotform.com/241484406570052
Fresh MDF?
Yes
No
Counterform Setup Required
Yes
No
Starting CTF Offset
Match Origin 1 To Starting CTF Offset
Complete
Activate Operations: CTF TP Pocket Rough; CTF TP Pocket Finish; CTF TP Holes_Flat; CTF TP Sm Part-Perimeter; CTF TP LG Part-Perimeter
Complete
Type a question
Complete
Generate ISO Code
Vacuum On >= 55%
Active Part Program "YYYY_MM_DD-Sonowood"
Feed @ 0
Start
Feed up
TGVS = 0
Last Tool Grabbed:
First Tool Grabbed
Activate Inside Passes, Inside Thickness - Through - Inside Locating Holes - Verify Appropriate Size (i.e. 110, 112, 120, etc.) Setup Plate: Green Tape. 1/4" Guide Holes?
Complete
Type a question
Complete
Generate ISO Code
Vacuum On >= 55%
Active Part Program "YYYY_MM_DD-Sonowood"
Feed @ 0
Start
Feed up
TGVS = 0
Last Tool Grabbed:
First Tool Grabbed
Activate Outside Passes, Outside Rough - Through - Outside Perimeter 0 - Verify Appropriate Size (i.e. 110, 112, 120, etc.). Setup Plate: Blue Tape.
Complete
Type a question
Complete
Generate ISO Code
Vacuum On >= 55%
Active Part Program "YYYY_MM_DD-Sonowood"
Feed @ 0
Start
Feed up
TGVS = 0
Last Tool Grabbed:
First Tool Grabbed
Activate Outside Pass, Outside Channel, Verify Appropriate Size (i.e. 110, 112, 120, etc.). Setup Plate: Slice through tape at top and bottom, remove border stock.
Complete
Type a question
Complete
Generate ISO Code
Vacuum On >= 55%
Active Part Program "YYYY_MM_DD-Sonowood"
Feed @ 0
Start
Feed up
TGVS = 0
First Tool Grabbed
Last Tool Grabbed:
Continue Running
After first Inside Program, two plates (one new and one inside) can be setup in order to run outside and inside passes in one program.
Submit
Should be Empty: