Certified Applicator Test
Date
*
-
Month
-
Day
Year
Date
Name
*
First Name
Last Name
Company Name
*
Address
*
Street Address
Street Address Line 2
City
State / Province
Postal / Zip Code
Email
*
example@example.com
Phone Number
*
Please enter a valid phone number.
Why do you want to be certified?
*
1. How long after a rain can you apply the product?
*
24 Hours
A week
48 Hours
36 Hours
2. How long after pressure washing can you apply the product
*
A week
72 Hours
24 Hours
30 minutes
3. Do not apply the product if rain is expected within 12 hours.
*
True
False
4. You don’t need to mask off non-porous areas like windows
*
True
False
5. You should turn off HVAC systems while applying the product.
*
True
False
6. Which of these statements best describes the proper flood coat method when applying the product to a vertical surface?
*
Any application method is fine is long as the surface looks wet.
From top to bottom, the product should visibly run down 4 to 6 inches and coat the surface.
From bottom to top, the product should be misted on the surface in an even manner as if you were applying paint.
The product should be splashed on the surface using a bucket.
7. On horizontal surfaces, you should broom excess to an area that has not reached saturation or wipe it up after how much time?
*
1 minute
1 hour
5-10 minutes
About a week.
8. For graffiti protection, it is ok to use one coat if you use a lot of product.
*
True
False
9. If applying a second coat to a vertical surface, when can you apply it?
*
When you reach the bottom of the wall, immediately go back and start applying the second coat from the top.
The first coat must fully cure for 10-14 days before applying the second coat.
The second coat may be applied as soon the first coat is dry to the touch.
Never apply a second coat.
10. The optimum surface and air temperature ranges for application are between 40° and 95° F
*
True
False
11. What type of applicator can be used?
*
A High Volume-Low Pressure Sprayer
Car Paint Spray Gun
Solvent Resistant Natural Bristle or Foam Brush
Solvent Resistant Thick Roller
12. The product can be applied over silicone caulk
*
True
False
13. Can the product be applied in a below grade area like a basement?
*
Yes of course!
No, it's not suitable for below grade applications
14. What is the curing time for water sealant applications?
*
Dry to touch in 30 minutes, walk on in 4 hours, and drive on in 12 hours
Dry to touch in 6 hours, walk on in 48 hours, and drive on in 5 days
Dry to touch in 2 hours, walk on in about 24 hours, and drive on in 72 hours
Dry to touch in 24 hours, walk on in 3 days, and drive on in 7 days
15. What is the curing time for graffiti applications?
*
Please Select
3 days for full protection
10 days for full protection
24 hours for full protection
7 days for full protection
16. Can Anti-graffiti be applied on horizontal surfaces?
*
Yes all the way
No, it is not recommended
17. Can the product be applied when the temperature is below freezing?
*
Yes as long as the substrate is dry, but it will cure more slowly
No, applying below freezing will cause the coating to crack and peel
18. How to know when the substrate is dry with a moisture meter
*
The meter is reading below 15%
The meter is reading above 30%
The meter is right at 22%
19. How to know when the substrate is dry without a moisture meter
*
Measure surface temperature and proceed if it’s above 32°F (0°C)
Perform a visual inspection for surface discoloration or chalkiness
Tap the surface with a metal tool to listen for a hollow sound
Taping a one-foot square overnight and checking for condensation in the morning
20. The product can bridge hairline cracks. (Hairline Crack - one that cannot be seen from about six feet away)
*
True
False
21. Is the above application done correctly?
*
Yes (Explain Below)
No (Explain below)
Please explain your answer for question #20
*
Test Score - You must get an 80% to pass
After submission you will recieve a copy of your responses and details about the next steps.
Submit
Should be Empty: