BCFS Forklift Competency Record
Please complete form for each operator and piece of equipment.
Email
example@example.com
Date
*
-
Month
-
Day
Year
2 digit month, 2 digit day, 4 digit year
Date
Evaluator Name
*
Company Name
*
Operator Full Name
*
Course Type
Please Select
New Certification
Experienced Certification
Re-Certification
Equipment Type
Class I Sit down Counterbalance
Class I Stand up Counterbalance
Class II Reach Truck
Class II Order Picker
Class III Power Pallet Jack
Class IV & Class V Internal Combustion Sit Down Counterbalance
Combi-Lift & Articulated Forklift
Rough Terrain Forklift (Straight Mast & Telehandler)
Forklift Capacity
Forklift Attachment
Back
Next
Forklift Operational Measurement of Competency
3 non-competent marks in any one section is a fail and will require further training. 12 non-competent marks over all sections is a fail and will require further training
Pre-Use Inspection
*
Rows
Competent
Satisfactory
Non-competent
Not Applicable
Visual Inspection-all items checked
Operational Inspection-all items checked
Deficiencies discussed with Instructor
Inspection checklist used/attached
Workplace Specific Hazards Identified
Travel Without a Load
*
Rows
Competent
Satisfactory
Non-competent
Not Applicable
3-point mount
Engage operator restraint
Raise forks 10-15 cm (tilt back slightly)
Establish eye contact with pedestrians
Obey traffic controls (as applicable)
Look in the direction of travel before moving
Load Pick Up (from ground level)
*
Rows
Competent
Satisfactory
Non-competent
Not Applicable
Stop and square to load
Forks spread enough to maintain load stability
Level the forks
Engage 2/3 load length (forks do not contact load)
Tilt load (enough to stabilize)
Look in the direction of travel before moving
Travel With a Load
*
Rows
Competent
Satisfactory
Non-competent
Not Applicable
Raise load (to clear obstructions)
Engage load fully
Drive in reverse (if vision blocked)
Stacking
*
Rows
Competent
Satisfactory
Non-competent
Not Applicable
Stop and square to deposit zone
Level forks
Verify overhead clearance
Raise load to appropriate height
Drive forward (load does not touch other material)
Lower load (load is stable/structure can support)
Look behind
Reverse from load (forks do not contact the load)
Lower forks to travel position
Destacking
*
Rows
Competent
Satisfactory
Non-competent
Not Applicable
Stop and square to deposit zone
Level forks
Verify overhead clearance
Raise load to appropriate height
Drive forward (forks does not touch other material)
Raise load (tilt if required)
Look behind
Drive reverse (load does not contact other material)
Lower forks to travel position
Travel on a Ramp - If required
Rows
Competent
Satisfactory
Non-competent
Not Applicable
Approach grade straight
Load leading (travel up the ramp)
Load trailing (travel down the ramp)
Loading Trailer - If Required
Rows
Competent
Satisfactory
Non-competent
Not Applicable
Restrain truck, trailer or railcar
Secure dock/bridgeplate ramp
Inspect Trailer
Uncoupled trailer (nose support or jack stand)
Personnel Lifting (with platform) - If Required
Rows
Competent
Satisfactory
Non-competent
Not Applicable
Secure approved platform
Ensure proper fall protection
Establish communications
Operator remains at controls
Test lift performed
Lift and lower personnel only
Shut Down
*
Rows
Competent
Satisfactory
Non-competent
Not Applicable
Clear of exits and emergency equipment
Lower forks
Parking brake on
3-point dismount
Fuel source off
Charging Electric - If Required
Rows
Competent
Satisfactory
Non-competent
Not Applicable
Shut down
Ignition off
PPE worn (face shield/apron/gloves)
Disconnect battery
Check battery water level (fill if required)
Connect charger
Refuel Gas/Diesel - If Required
Rows
Competent
Satisfactory
Non-competent
Not Applicable
Shut down
Ignition off
PPE worn (apron/gloves)
Nozzle contacts tank
Refuel Propane - If Required
Rows
Competent
Satisfactory
Non-competent
Not Applicable
Shut down
Ignition off (engine run until line empty)
PPE worn (goggles/gloves)
Tank off and removed Safely
Tank Installed correctly (no leaks and securely attached)
Elevators - If Required
Rows
Competent
Satisfactory
Non-competent
Not Applicable
Verify capacity
Sufficient clearance
Enter slowly (load end forward)
Tank off and removed Safely
Tank Installed correctly (no leaks and securely attached)
Final Operational Evaluation Results
*
Competent - PASS
Non-Competent - FAIL
Instructors Comments
The results of this evaluation have been explained to the operator and they understand them
*
Yes
No
Submit
Should be Empty: