UTILITY VEHICLE (UTV) DAILY INSPECTION
Company:
*
Please Select
A-American
Affiliated
ALCAL
Coalition Glass
CPS
David's Fencing
Dorvin D Leis
Firetek
GIMA
Green Thumb
HAAS
IP
KOGA
KONE
M Nakai
Nordic PCL
Northshore Ext
Ohana Concrete
Road Builders
Schnabel
Simmons Steel
Swanson Steel
Swisslog
Top Priority
Unistrut
WASA
Window World
Name of Operator:
*
UTV Brand/Model:
*
Project:
*
Date of Inspection:
*
/
Year
/
Month
Day
Date
UTV Equipment #(s):
*
Meter Reading: (Miles, not hours. Make sure turn engine on first to view mileage.)
*
OPERATOR INSPECTION
1. The operator is trained in UTV operation, has reviewed the operation manual, and has a valid driver's license.
*
YES
N/A
2. The operator will utilize seat belt while operating UTV, will obey speed limits and applicable traffic laws, will not use a mobile device while driving. Ensure all riders wear seat belt. No riders in cargo bed.
*
YES
N/A
VISUAL INSPECTION
3. Walk around Inspection: Look around and under vehicle for loose bolts, damage, trash build-up, fluid leaks, or broken/worn parts.
*
YES
N/A
4. Check fluid levels for: • Engine oil (under cargo bed) • Transmission fluid (under cargo bed) • Brake fluid (under hood) • Hydraulic oil (under seat) • Coolant (under hood) USE CAUTION! Do not open anything hot.
*
YES
N/A
5. Clean/clear the following areas: • Radiator screen (under hood) • Around muffler and exhaust pipe • Engine manifold area
*
YES
N/A
6. Tires and joint boots are in good condition, with adequate air pressure. No cuts, missing chunks/lugs, rim separation.
*
YES
N/A
7. “Easy Checker” control panel and levers are clean, safety labels clearly visible (no paint over spray, etc), warning lights are not illuminated.
*
YES
N/A
8. Side view and rear-view mirrors are in place and undamaged.
*
YES
N/A
9. Weight of stored material in cargo bed is within the weight capacity. Stored material is secured down appropriately.
*
YES
N/A
FUNCTION TESTING
10. Braking/steering devices and parking brakes are operating properly. No hesitation/lurching.
*
YES
N/A
11. Alarms/horns are operating properly.
*
YES
N/A
12. All Safety Indicator lights are functioning properly. Headlights working properly.
*
YES
N/A
13. All seat belts are functioning properly. Roll-Over Protective Structure (ROPS) in good condition.
*
YES
N/A
WORK AREA INSPECTION
14. Weather and wind on-site have been evaluated and determined acceptable for UTV use.
*
YES
N/A
15. Weight of UTV, riders, and other equipment stored in cargo bed is within floor capacity of work area.
*
YES
N/A
Provide any comments or explain any corrective action completed to pass this inspection:
Operator Signature:
*
Preview PDF
Submit
Should be Empty: