Start Mock test
Pass mark 16/20
Your email
*
Type a question
Who is usually responsible for weekly Fire Alarm testing?
The responsible person or appointed staff member
The fire service
The local council
What is normally used for weekly Fire Alarm testing?
A heat detector
A smoke machine
A manual call point
How long should the Fire Alarm sound during a weekly test?
For at least 10 minutes
Until the building is empty
Long enough to confirm it works
Where should Fire Alarm tests be recorded?
Weekly tests do not need recording
In the Fire Safety Logbook
On a noticeboard
What should happen to the Fire Alarm panel after testing?
It should be switched it off
It should be reset to normal
The cover should be closed
How often should a functional test of Emergency Lighting be carried out
Every 5 years
Monthly
Only after a power failure
What should you do if any Emergency Lighting fails during a test?
Repair or replace it immediatley
Disconnect it
Ignore it
What is the purpose of a full discharge Emergency Lighting Test?
To clean the lights
To check battery capacity and system performance
Test normal lighting
How long should Emergency Lighting test records be retained?
For the life of the system
Until the next test
1 year
What should be checked during routine Emergency Lighting maintenance?
Batteries, lights and fittings
Only batteries & lights
The colour of bulbs
During a visual inspection of a Fire Extinguisher, what is the first thing to check?
Paint colour
That it feels full
That the extinguisher is accessible and clearly visible
What does a missing Fire Extinguisher tamper seal or safety pin suggest?
It may have been used or tampered with and needs servicing
The extinguisher is new
It has been moved recently
What should you do if a Fire Extinguisher is damaged or corroded?
Clean it and return it to use
Report it and remove it from service
Ignore it until the next inspection
When inspecting, how should the label on a Fire Extinguisher appear?
Legible, clearly visible, and facing outward for immediate reading in an emergency
Labels are not required - just the correct colour extinguisher
They must be in multiple languages
What colour label does a foam Fire Extinguisher have in the UK?
Black
Pink
Cream
What is the shape and colour of the required Mandatory Sign on a Fire Door?
Blue & Circular
Red & Circular
Green & Square
When a Fire Door is constructed, installed, used, and works correctly, it should hold back a Fire for a minimum of...
3 minutes
30 minutes
3 hours
What is the best tool to measure Gaps in a Fire Door?
A Gap Gauge Tool
A Tape Measure
A Ruler
A Fire Door should have a minimum of how many Hinges?
2
3
4
What is the correct name of the gap filling strip that should be fitted around a Fire Door?
A Bioluminescent Strip
An Intumescent Strip
An Expanding Seal
To join our mailing list & agree to our privacy policy opt-in below: https://healthandsafetytraining1st.co.uk/privacy-policy/
*
I agree
FireSafetyInspectionsTag
Passfiresafetyinspections
Please verify that you are human
*
CalculationCorrection
Submit
Score
Should be Empty: