Outdoor Paving and Tiling Installation Statement of Work Builder

Outdoor Paving and Tiling Installation Statement of Work Builder

This form is used to identify the dimensions of your garden area which you wish to have paved or tiled. By providing measurements and photos of the area, contractors will be able to ascertain how much labour and materials will be required to carry out the renovation. Should you have any questions please contact Info@Bid4MyJob.co.uk.
What is the width (m) of the outdoor area you require paving or tiling?
What is the length (m) of the outdoor area you require paving or tiling?
Area to be resurfaced
A gap of 6-10 mm needs to be inbetween slabs
What is the purpose of the structure to be installed?

Other
What type of tile or outdoor floor do you wish to lay?

Other
Do you have a link to the tiles or paving slabs you wish to install?
What is the length of the tile you want installed?
What is the width of the tile you want installed?
What is the thickness of the tile or paving slab you want installed
Ground Preparation
Do you require the contractor to prepare or excavate the ground?
Do you know what type of ground is located where you want to build the area?

Other Ground Type
Is the area where the tiles are to go on a slant?
Please take a photo of the area you want the tiles installed.
Will you require disposal of the excavated ground?
Please note if the volume of substrate to be excavated is greater than 1.69m3 then a skip may be required.
Is the ground an area of high water content?
Based on the type of outdoor based area you want resurfaced you should have a underlay thickness of the following:
The thickness of the slabs plus 35mm for a layer os sand plus another 18mm for the slabs to be level with the turf. if heavier loads you want hardcore to a depth of 75-100mm in addition to the sand ------ dry mortar mix of 1 part cement 3 part sand to fill gaps
Volume of Ground to excavate for a standard base size
ispose of calculation based on width, length, and height - this will be are of structure plus x either side plus 100mm - comment could be 50-100mm substrate but this calculatoror is based on 100mm
Volume of substrate for tile laying.
t’s recommended that the substrate for exterior tiles is a concrete or cement sand screed with a minimum thickness of 50mm - https://www.toppstiles.co.uk/knowledge-base/how-to-fit-exterior-tiles
Does your property have any of the following access? Tick all that apply.

Other
Based on the Medium to Large area of your structure the concrete base thickness (m) should be:
Estimated Materials Required
Volume of MOT 1 substrate required for well drained non heavy use
Volume of MOT 1 substrate required for a Medium to Large Base
Volume of Standard Base (m3) - TBC
Volume of Medium to Large Base (m3) - TBC
Standard Dry Volume
Medium to Large Dry Volume
14. How much cement for a base is to be used (KG) for a Standard Base? (1part)
Calculating cement requirements involves determining concrete volume, applying the appropriate mix ratio, and accounting for material density. Standard cement density is approximately 1440 kg/m³, while one 25kg bag occupies about 0.0174 m³ volume.
How much cement for a base is to be used (KG) for a Medium to Large Base? (1part)
Calculating cement requirements involves determining concrete volume, applying the appropriate mix ratio, and accounting for material density. Standard cement density is approximately 1440 kg/m³, while one 25kg bag occupies about 0.0174 m³ volume.
You will require the below number of Standard UK Bags (25kg) of Cement for a Standard Base
You will require the below number of Standard UK Bags (25kg) of Cement for a Medium to Large Base
How much Sand for a base is to be used for a Standard Base (kg)? (2 parts)
The density of sand is between 1,450–1,600 kg/m³
How much Sand for a base is to be used for a Medium to Large Base (kg)? (2 parts)
You will require the below number of Standard UK Bags (25kg) of Sand for a Standard Sized Base
You will require the below number of Standard UK Bags (25kg) of Sand for a Large to Medium Sized Base
Property and Access Details
Project Address

Street Address

Street Address Line 2
CityCountyPostal / Zip Code
Does your property have any of the following acess? Tick all that apply

Other
Take Photo of your access point
Will you require use of the garden throughout the project duration?
Is there any additional information a contractor should be aware of prior to quoting and carrying out the works at the property relating to the project or access?
Please select 3 different dates when the work can commence at your property. To ensure the greatest amount of competition for your work, for each date selected, please ensure they are in different weeks from one another. It is advised to select the first date 2 weeks from todays date.

DayMonthYear
2 digit day, 2 digit month, 4 digit yearDate
Please specify the date in second week work can commence at your property.

DayMonthYear
2 digit day, 2 digit month, 4 digit yearDate
Please specify the date in third week work can commence at your property.

DayMonthYear
2 digit day, 2 digit month, 4 digit yearDate
Contact Details
Are you the homeowner of the property? If not do you have permission to carry out the works defined above?
Contact Name

First NameLast Name
Phone Number
Contact Email
example@example.com
Project Cost Estimation
Contractor Name

First NameLast Name
Contractor Email
example@example.com
Total Estimated Range
Total Estimated Amount
Deposit Amount
Final Agreed Amount
Should be Empty:

Outdoor Paving and Tiling Installation Statement of Work Builder

Ground Preparation

Estimated Materials Required

Property and Access Details

Contact Details

Project Cost Estimation