Flatbed/Service Body Camper Builder

Before you dig in, please read the "Flatbed Design Considerations" Document so you understand what we can and cannot do, dimensionally. It's a bummer to dive deep into this only to find out we can't build you what you're looking for!
- Vehicle Make?
- Ram Model?
- Nissan Model?
- Chevy/GMC Model?
- Jeep Model?
- Toyota Model?
- Ford Model?
- Vehicle Year?
- Is it a Flatbed/Tray or a Service Body (Toolboxes)?
- Camper Skin Color:
- Please read about our Painted vs. Anodized skin options and see photos of the different colors here!
- Trim Color:
- Extra Bedding Height? (Stock Height is 8")
- Rear Door Style:
  All doors come equipped with keyed external locks and internal pin latches.
- Rear Door Style:
  Service Body Barn Doors are designed around your toolboxes and will be installed after we put the camper on your truck. We'll also add some trim/angle to the boxes to create side jambs for a good seal. All doors come equipped with keyed external locks and internal pin latches.
- Rear Door Height Adjustment:
  Increase the rear door opening by 2". Stoop a little less when getting in and out of the camper.
- Describe the asymmetrical split you want and which door you want to open first (driver or passenger):
  Something like "70/30" or "make passenger door 36in" Note: Smallest door we will make is 18" wide.
- Driver Side Solid Metal Side Hatch?
  Side Hatches come with external locking latches, keyed the same as your rear door(s). Hatches are 36" wide and as tall as the sidewall allows. Want a window/hatch combo? Check out our "windoors" in the window section.
- Driver Side Hatch Position:
  We recommend placing hatches toward the cab to maximize utility and minimize interaction with the barn doors when they are fully open and latched. This interaction is unavoidable on all 5' and 5.5' beds and some 6' beds.
- Window in Driver Side Hatch?
- Folding Countertop in Driver Side Flip-Down Hatch?
  11x33" folding countertop, mounted to the flip-down hatch that can be used inside or outside the camper.
- Passenger Side Solid Metal Side Hatch?
  Side Hatches come with external locking latches, keyed the same as your rear door(s). Hatches are 36" wide and as tall as the sidewall allows. Want a window/hatch combo? Check out our "windoors" in the window section.
- Passenger Side Hatch Position:
  We recommend placing hatches toward the cab to maximize utility and minimize interaction with the barn doors when they are fully open and latched. This interaction is unavoidable on all 5' and 5.5' beds and some 6' beds.
- Window in Passenger Side Hatch?
- Folding Countertop in Passenger Side Flip-Down Hatch?
  11x33" folding countertop, mounted to the flip-down hatch that can be used inside or outside the camper.
- Front/Cab-Facing Window?
  We'll need you to tell us where the bottom of your truck's rear glass is in relation to the tray or top of your toolboxes.
- Windows in the Barn Doors Halves?
  One in each barn door.
- Windows in the Asymmetrical Barn Doors?
  Window will be placed in the larger door, as centered on the rear as possible.
- Windows in Rear Hatch?
  Centered in the rear hatch.
- Driver Side Window?
- Passenger Side Window?
- NOTE: The windoor's exterior locks are keyed different than the rear doors of the camper.
- NOTE: The sliding version of the "windoor" will allow a small amount of water intrusion during specific conditions. A sideways rain, at highway speeds, hitting the sliding pane at just the right angle will cause a small drip. If you select this option please be aware of this. The windoor's exterior locks are keyed different than the rear doors of the camper.
- Driver Side Window Position?
- Passenger Side Window Position?
- Arctic Tern Windows:
  Arctic Tern windows can be installed on the sidewalls or rear doors of campers for MSRP + $175 Install Fee. If you're interested in these windows please indicate what window and where in the comments for a quote.
- Maxxair Fan:
  Fans are pre-wired and routed past lift panels to the rear, driver side of the camper. Fan position is fixed so it is over the bed slide while you're sleeping and usable when the camper is closed.
- Roof Tracks:
- Cross Bars For Rhino Rack Rails?
  65" Bars recommended for midsize trucks, 71" for full-size.
- Roof Solar Port?
  Positive and Negative MC4 connectors on the roof, pre-wired and routed past lift panels to the rear, driver side of the camper.
- Lift Struts to Help Open/Close the Roof?
  Recommended on all campers. We will use our best judgement to select the appropriate strength struts for your camper. If you're planning on carrying cargo or loading up on solar, let us know in the comments section at the bottom of the form.
- Awning Mount? (Awning Not Included)
  Tell us what awning you will be sending us to install in the comments. If your desired awning is not on our supported awnings list please confirm with us we're able to mount it before ordering the awning.
- Click Here To See A List of Approved Awnings as well as instructions for shipping your awning to us ahead of your camper being built.
- PLEASE NOTE: You've selected Barn Doors, Increased Rear Door Height, and Awning Mount. The larger barn door may impact the awning and result in not being able to latch the door on the awning side securely against the camper when open. We recommend removing the Increased Door Height to avoid this potential interaction.
- Awning Prep?
  We'll pre-place studs, pre-drill the studs, and relocate the roof latches so a future awning won't block them.
- Awning Channel For Keder Rope?
  Supports 8mm (5/16") Keder Rope.
- PLEASE NOTE: You've selected Black Trim, but our Awning Channel is Silver. Just a heads up that you'll have some clashing colors on there.
- Jerry Can Mount?
  Jerry Can NOT Included.
- Studs in Frame for a RotoPax Mount?
  Studs spaced for the Standard, DLX, or LOX mounts. Mount and Installation NOT Included. Let us know in the comments if you'd like a quote for mount installation as well!
- Propane Tank Mount?
  Propane Tank NOT Included.
- 5lb Propane Tank Position:
  Note: Barn doors must not have windows in order for us to place the mount on them.
- 10/11lb Propane Tank Position:
  Note: We will not place a 10/11lb propane tank mount on barn doors.
- Exterior Mounting Track:
  80/20 and Unistrut are functionally identical. 80/20 is a little sleeker and Unistrut is a little lighter as well as takes a more universally available T-nut. If you'd like it on BOTH sides of the camper, please make that known in the comments.
- Full-Length Unistrut Track Position:
  Full-Length track requires a sidewall with no hatches or windows.
- Full-Length 80/20 Track Position:
  Full-Length track requires a sidewall with no hatches or windows.
- Half-Length Unistrut Track Position:
- Half-Length 80/20 Track Position:
- Fold Down Interior Countertop?
  Countertop is 16x36". We recommend placing it towards rear to maintain usability when bedslide is extended. If you'd like it towards the front please indicate that in the comments section. May not be available for service body builds due to short walls.
- Clear Vinyl Windows?
  Removable clear vinyl layer in canvas windows, between bug screen and solid canvas layer.
- Canvas Insulation Kit?
  Note: We recommend removing the liner when the camper is closed, but it's your camper and you can do what you want.
- Note: V2 of the Arctic Pack is in production! Click here for photos and a rundown of what you get.
- Interior Overhead Puck Lights?
  These dimmable, remote-controlled puck lights get added to the interior "push bars". Wires run to rear, driver side of camper and left bare for customer to complete.
- Headliner?
  Typically paired with roof insulation for a completed, clean finish. Also easy to remove if you want to insulate yourself.
- Roof Insulation?
  Typically paired with the headliner for a completed, clean finish.
- Roof Daisy Chain?
  Sewn, looped runners bolted into the ceiling of the camper for hanging of wet clothes, lanterns, or your kid's iPad to get it out of their reach.
- Mattress?
  A 3" mattress REQUIRES a 10" cabover. The 4" and the Hest REQUIRE an 11" cabover.
- Your sleep is important. Please check out our in-depth mattress guide here!
- Door Latch Covers
  A protective cover that encloses your rear door and side hatch latches to protect them from road salt, highway grime, and dust while driving!
- Positive Pressure Vent?
  Placed on the passenger-side of the front wall.
- Third Brake Light?
- Shore Power Port?
  Note: This is a 120v AC passthrough, NOT a 30a RV hookup.
- Exterior Flood Lights
  The RV Leisure lights are 400 lumen (and come with clear and amber covers). The Rigid Scene lights are 1100 lumen (white light) and come with an all-metal housing.
- Number of Flood Lights
  Please indicate in the comments where you'd like the flood lights mounted. We will install flood lights towards the front or rear of both sides of the camper and towards the driver or passenger side of the rear wall (or both).
- Planar 2D Diesel Heater w/ Heater Port*
  *battery required for proper operation - not included
- PLEASE NOTE: Current tariffs on Canadian products may result in the Planar cost being more than anticipated. We're seeing anywhere from $120 to $200 more per unit as the tarriff bills arrive. Please be aware we may need to charge more than $1800/unit as this continues to unfold and change week to week.
- Standalone Diesel Heater Port
  2" ports fit most 2kw heaters using 2"/60mm ducting. 3" ports fit most 5kw or 8kw heaters using 3"/75mm/76mm ducting.
- Heater Port Position
  We recommend placing the ports towards the rear of the camper where they will be least affected by cargo or your future build-out. If you'd like it placed in a custom location please indicate where in the comments.
- Are You Interested in Components for an Interior Build-Out?
- Click this link to learn about modular build out options and components from Lost Hiway Customs. We can have them ready for pickup with your camper!
  
  Don't worry, that link opens a new tab so you won't lose your build progress.
- Please tell us the following information in the comments alongside any custom requests:
- -Which Arctic Tern window(s) you'd like and position for each.
- -If you're going to be carrying cargo or several solar panels on your roof.
- -Where you would like the exterior flood lights positioned.
- -What awning you'd like installed.
- Comments/Custom Requests:
  Want something centered on a sidewall? Sure. Want a smaller hatch to also fit a window next to it? You got it. Want us to change the fundamental design of the camper to fit an RV door? No. We cannot make all custom requests happen, but we'll try.
- Through Bolting Fee (Mandatory if we're installing the camper):
  Otherwise you need to come get the camper on a flatdeck trailer and take it home to install yourself.
- Where Would You Like The Camper Installed?
- Camper Total
  Note: This does not include the 9.39% sales tax
- Name
  
  First NameLast Name
- Email
  example@example.com
- How did you hear about us?
- If other, where?
- Please note: Your spot in line is not secured until the $500 deposit is paid. You may pay the deposit on the next page, or pay later.
  
  If you're just wanting a formal estimate mocked up - submit the form, and reply-all to the email you just received and ask for a formal estimate!
- Form Source
- Should be Empty: