PDI
ATV/UTV PRE-DELIVERY INSPECTION
DEALER NAME:
INSPECTOR NAME:
Date
-
Month
-
Day
Year
2 digit month, 2 digit day, 4 digit year
Date
YEAR:
MODEL:
DISPLACEMENT:
VIN #:
ENGINE SERIAL #:
BULLETIN CHECK
Ensure all Recalls have been completed
Ensure all service bulletins have been implemented
NOTES:
VEHICLE ASSEMBLY
Inspect Vehicle And Crate For Shipping Damages (If Damaged Make A Warranty Claim On The Portal)
Safety Harness / Seat Belt Installation (If Equipped) - Verified
Battery - Assembled/Charged/Installed (Fill/30minutes, Trickle Charge 8 hours minimum)
Dashboard - Set Clock/Check function
Tire Air Pressure - Verified
Controls and Control Switches function (Turn Signals, Horn, Engine Stop, 4x4, Etc.) - Verified
Grease Points (A-Arms, Ball Joints, Driveshafts, Etc.) - Lubricated With Waterproof Grease
Lighting & Brake Light(s) Operational - Verified
Engine Oil Level - Verified
Accessories (winch, remote, Windshield Wiper, Light Bar, Radio, Cameras, Etc.) (If Equipped) - Verified
Engine Coolant Level - Verified
Tool Kit, Owner's Manual, Trailer Hitch and Tire Pressure Gauge - Verified
Brake Fluid Reservoir Level - Verified
Suspension Preload / Shock Dampen Settings (Set All Clickers To Centre) (If Equipped) - Verifed
Front Differential Oil Level - Verified
Ensure All Doors, Windows, Roofs, Cargo Boxes, Etc. Are Sealed and Function Properly - Verifed
Rear Differential Oil Level - Verified
Mandatory Warranty Bulletins Applied - Verified
Transmission Oil Level - Verified
Visual Check of Hose & Electrical Routing - Verified
CRITICAL FASTENER CHECK
A-Arm/ Control Arm Fasteners - Verified
Tie Rod / Ball Joint Fasteners - Verified
Shock Mount Fasteners - Verified
Wheel Nuts, Hub / Axle Nut Fasteners - Verified
Brake Caliper Mount Fasteners - Verified
Saftey Component, Seatbelt, Etc, Fasteners - Verified
Steering Wheel / Handlebar Fasteners - Verified
ROPS Roll Cage Fasteners (If Equipped) - Verified
Check All Body Panel Fasteners - Verified
All Fasteners Torqued To OEM Specification - Verified
Check All Hose Clamps & Electrical Connections - Verified
OPERATIONAL TEST
Electrical Function (Radio, Camers, Dash, Etc.) - Verified
89 Minimum Octane Unleaded Fuel - 5 Liters Added
2WD/4WD/4WD-LOCK Function - Verified
Engine Start And Run To Operating Temperature (Ensure Radiator Fan Is Operational) - Verified
Speedometer And Speed Limiter Function (Reverse And 4WD-Lock) - Verified
Transmission / All Shift Functions (H/L/N/R/P) - Verified
Post-Operation Check - Cooling Fan Function OK / Fluid Levels OK / Suspension Settings OK / Steering OK
Brake Function - Verified
Parking Brake Function (If Equipped) - Verified
Hang Tags / Tool Kit / Owner's Manual / Trailer Hitch - Verify Installed
Throttle Function - Verified
Clean And Detail - Verified
Steering Function - Verified
Inspect Vehicle For Faults, Damages, Isues, Etc. (If Faulty Make A Warranty Claim On The Portal)
https://portal-aodescanada.ca/index.php
Back
Next
ATV/UTV PRE-DELIVERY INSPECTION
CUSTOMER WALK-AROUND
Vehicle Features Overview (As Necessary: EPS, Tilt Steering, Dump Box, Dashboard/Button Functions, Etc.)
Starting And Stopping The Vehicle
Lights Operation
Brake Operation
Shifting The Transmission / Customer Advised On Proper CVT And Low Gear Operation
Suspension Preload Setting/Damping Adjustment (If Equipped)
Winch Saftey / Remote Control Operation (If Equipped)
Show The Customer The Priority Maintenance Items (Air Filter, Cabin Air Filter, Clutch/ Belt, Suspension, Grease Locations, Etc.)
Show The Customer The Vehicle Fluid Levels (Coolant, Engine/ Transmission Oil, Front/ Rear Differential Fluid, Brake System)
Checking Tire Pressure
Electrical - Fuse And Relay Locations
Customer Has Been Shown Access Panel Removal/ Installation (Example: Hood, Side Panel, Air Filter, Clutch, Etc.)
Customer Has Been Advised On Proper Storage And Trailering / Tie-Down Points Of The Vehicle
Customer Has Been Shown The AODES Owner's Manual, Maintenance Schedule, Warranty Terms And Conditions
Dealer Has Explained The Break-In Procedure And Fuel Requirements To The Customer
Dealer Has Explained The Maintenance Intervals To The Customer
Customer Has Been Offered Driving/Riding Safety Training (If Applicable)
NOTES:
Inspector:
Build Date:
-
Month
-
Day
Year
2 digit month, 2 digit day, 4 digit year
Date
Signature:
Inspector Verifies That Pre-Delivery Inspection Has Been Completed. The Vehicle Is Ready For Sale.
Sales Rep:
Sold Date:
-
Month
-
Day
Year
2 digit month, 2 digit day, 4 digit year
Date
Signature:
Sales Representitive Has Preformed The Customer Walk-Around. The Customer Is Ready To Ride.
Customer:
Acceptance Date:
-
Month
-
Day
Year
2 digit month, 2 digit day, 4 digit year
Date
Signature:
I Accept The Vehicle Operational And Cosmetic Condition. I Was Educated On The Proper Use Of The Vehicle And Am Ready To Ride.
Preview PDF
Submit
Should be Empty: