• Other (BYO) Quote Request

    For customer-supplied items other than tumblers
  • Format: (000) 000-0000.
  • Items We May Not Be Able to Engrave

  • While we can engrave a wide variety of customer-supplied items, not every material or product is suitable for laser engraving. For safety and to protect your item and our equipment, please keep the following in mind:

    Precious metals and high-value jewelry – We do not engrave gold, silver, platinum, gemstones, or other precious or high-value jewelry. Some jewelry and accessories made from laser-compatible lower cost materials, such as stainless steel, may be suitable for engraving.


    Vinyl, PVC and certain plastics that may contain PVC (including some imitation leather) – Vinyl and PVC cannot be safely laser engraved. When exposed to a laser, PVC can release highly toxic and corrosive gases that are hazardous to people and can also damage engraving equipment. For this reason, we err on the side of caution and will not engrave plastics that cannot be positively identified as laser-safe and PVC-free.


    Certain types of glass – We cannot engrave customer-supplied glass that is borosilicate, reinforced, tempered, or otherwise unsuitable for laser engraving. These types of glass may react poorly to the laser, resulting in uneven, inconsistent, or poor-quality engraving. If you're unsure what type of glass you have, please let us know when submitting your request.


    Leather and imitation leather – We can engrave many genuine leather products; however, genuine leather varies considerably in composition, dyes, treatments and finishes, so engraving results can be unpredictable. Imitation, synthetic or unknown leather may contain PVC or other materials that are unsafe to laser and therefore must be positively identified as laser-safe and PVC-free before we can engrave it (see the PVC disclaimer above).

    Please also note that laser engraving is not the same as embossing or debossing — laser engraving burns or removes material from the surface rather than pressing a recessed design into the leather. If you are expecting a debossed (pressed in) appearance, that is a different technique that involves a die and pressure, not laser engraving.


    Unknown materials, coatings or finishes – We may decline an item if its material, coating or surface treatment cannot be identified or could produce hazardous fumes, damage the item, or be unsafe to engrave.


    Items that cannot be safely positioned in our laser – Items must fit within our machine and be capable of being safely positioned and secured for engraving. Our maximum engraving bed size is 12" × 24", with a maximum item height of 11". The usable engraving area and maximum item height may be smaller depending on the item's shape and dimensions, the location of the engraving, and whether the rotary attachment is required.


    New or unfamiliar materials and items – If your project involves a material or type of item we haven't previously engraved, or one for which we don't already have established laser settings, we may require one or more sacrificial test pieces made from the same material, coating and finish.

    Testing allows us to determine the appropriate laser settings before engraving your finished item. Any items supplied for testing are considered sacrificial and should not be expected to remain usable or undamaged after testing.

    We may decline to engrave one-of-a-kind, high-value or irreplaceable items when suitable test material is not available. We will not experiment with unknown settings directly on an expensive or irreplaceable finished item.


    Customer-Supplied Item Disclaimer


    We take great care with every project, but customer-supplied materials can sometimes react unpredictably to laser engraving. Results can vary depending on the material, coating, finish, construction and condition of the item.

    By supplying an item for engraving, the customer accepts the inherent risks involved in the engraving process. The Laser's Edge cannot guarantee the final result or replacement of a customer-supplied item if it cracks, breaks, discolours, warps, melts, develops an unexpected finish, or is otherwise damaged due to the material or its reaction to the engraving process.

    If we're unsure whether an item can be safely or successfully engraved, we may ask for additional information about the material, require one or more sacrificial test pieces, or decline the project. This is particularly important for unfamiliar, high-value or irreplaceable items, as we cannot determine unknown laser settings by testing directly on the finished item.

  • What is the material you want engraved or cut (click all that apply)
  • Latest acceptable completion date*
     - -
    2 digit month, 2 digit day, 4 digit year
  • Should be Empty: