• EN

    Zipper Check

  • Image field 75
  • Image field 87

  • Good news! The BellyFit will zip right into your jacket. 

    (No Adapter required).

  • Adapter needed: V5 LONG

    This adapter will move the BellyFit (27") up by 5" from the bottom of your jacket so that it sits at a better height.

  • Good news! The BellyFit will zip right into your jacket.

    Please note that the BellyFit is 27" so you will have a little extra on the top. Most of our customers roll/fold the top of the BellyFit either back down inside the jacket or on the outside. Some even use the snaps to snap it down. The simplest approach is to unsnap the top button and fold the top of the BellyFit down flat inside your jacket for a clean, comfortable look. 

  • Unfortunately we do not have a Zip Adapter for your particular zip.

    We do however have a "DIY" adapter option. The "DIY" zip matches the zip on the BellyFit extender. You would simply need to sew each side of the DIY zip along the inside or outside of your existing zip. A local seamstress would be able to do this without any trouble. The BellyFit would then zip onto your jacket. When you're finished using the BellyFit, you can simply unstitch each side of the zip, remove and your jacket would be back to normal.
     
    You can find the DIY zip under our Zip Adapters online. 
     
    DIY zip for MakeMyBellyFit Jacket Extender

  • Unfortunately we do not have a Zip Adapter for your particular zip. We're unable to make your belly fit :(

  • Adapter needed: V10

  • Adapter needed: V10 LONG

    This adapter will move the BellyFit (27") up by 5" from the bottom of your jacket so that it sits at a better height.

  • Adapter needed: V10

    Please note that the BellyFit and adapter are 27" so you will have a little extra on the top. In this situation, most of our customers roll/fold the top of the BellyFit and adapter either back down inside the jacket or on the outside. Some even use the snaps to snap it down. The simplest approach is to unsnap the top button and fold the top of the BellyFit down flat inside your jacket for a clean, comfortable look. 

  • Adapter needed: V3

  • Adapter needed: C1

  • Adapter needed: C2

  • Adapter needed: M10

  • Adapter needed: M1

  • Adapter needed: M1

    Please note that the BellyFit and adapter are 27" so you will have a little extra on the top. In this situation, most of our customers roll/fold the top of the BellyFit and adapter either back down inside the jacket or on the outside. Some even use the snaps to snap it down. The simplest approach is to unsnap the top button and fold the top of the BellyFit down flat inside your jacket for a clean, comfortable look. 

  • Adapter needed: M2

  • Adapter needed: M2

    Please note that the BellyFit and adapter are 27" so you will have a little extra on the top. In this situation, most of our customers roll/fold the top of the BellyFit and adapter either back down inside the jacket or on the outside. Some even use the snaps to snap it down. The simplest approach is to unsnap the top button and fold the top of the BellyFit down flat inside your jacket for a clean, comfortable look. 

  • Adapter needed: C3

  • Adapter needed: C3 LONG

    This adapter will move the BellyFit (27") up by 5" from the bottom of your jacket so that it sits at a better height.

  • Adapter needed: C3

    Please note that the BellyFit and adapter are 27" so you will have a little extra on the top. In this situation, most of our customers roll/fold the top of the BellyFit and adapter either back down inside the jacket or on the outside. Some even use the snaps to snap it down. The simplest approach is to unsnap the top button and fold the top of the BellyFit down flat inside your jacket for a clean, comfortable look. 

  • Adapter needed: C4

  • Adapter needed: C4

    Please note that the BellyFit and adapter are 27" so you will have a little extra on the top. In this situation, most of our customers roll/fold the top of the BellyFit and adapter either back down inside the jacket or on the outside. Some even use the snaps to snap it down. The simplest approach is to unsnap the top button and fold the top of the BellyFit down flat inside your jacket for a clean, comfortable look. 

  •  
  • Should be Empty: