CVL-RM Electrical Shift Round Sheet
Date
*
-
Month
-
Day
Year
Date
Shift:
*
Please Select
Day
Night
Crew:
*
Please Select
A
B
C
D
Day
Name:
*
E-mail:
Not Used:
Not Used
Straightener / Collecting Bed
OK
Needs Repair
Repaired
Notes (below)
Go to STR pulpit, check for any issues
Inspect straightner MCC room
Inspect straightener festoon cable, trolleys, oil leaks and tracks
Inspect and secure all electrical panel enclosure doors in basement
Check Collecting Bed R1 rolls. Reset any trips during delays.
Tag any unresolved problems at the breaker and ensure REC tag is entered.
Check Collecting Bed R3 rolls. Reset any trips during delays.
Tag any unresolved problems at the breaker and ensure REC tag is entered.
Visually check Straightner motors and encoders (All green lights)
Listen for unusual noises from straightner and note as needed
Inspect rolls for unusual movement during operation
Inspect straightner for oil leaks
Inspect drive sprockets on collecting bed chains
Inspect collecting bed for leaks (Oil & Hydraulics)
Inspect collecting bed chain #1 [Note any broken chains and chain #]
Inspect collecting bed chain #2 [Note any broken chains and chain #]
Inspect collecting bed chain #3 [Note any broken chains and chain #]
Note lube oil level on straightener 1, record level (12' minimum)
Note lube oil level on straightener 2, record level (12' minimum)
Note hydraulic oil level on collecting bed, record level from IFIX (14Min)
Notes
Notes
Note lube oil level on straightener 1, record level (12' minimum):
Note lube oil level on straightener 2, record level (12' minimum):
Note hydraulic oil level on collecting bed, record level from IFix
(14Min)
Other Notes:
Other Notes:
South Mezzanine Area / SCADA Room
OK
Needs Repair
Repaired
Notes (below)
Check all A/C units and water piping
Make sure all entrance doors are locked
Make sure all panel doors are closed
Notes
Notes
Other Notes
North Mezzanine Area / SCADA Room
OK
Needs Repair
Repaired
Notes (below)
Check all A/C units and water piping
Make sure all entrance doors are locked
Make sure all panel doors are closed
Notes
Notes
Other Notes
East Side of Rolling Mill
OK
Needs Repair
Repaired
Notes (below)
Inspect A, B and C motors. Make sure man fans are on B and C if in use.
Check babbitt bearing oil level on mill motors. Note any that you add oil to.
Make sure primary babbitt lube pump is running. Note any that are running on secondary.
Check for arcing on all mill motor commutators
Check the mill motor ventilation blowers for excessive noise or dirt
accumulation on the fan covers
Check stands 1-12 for gearbox oil leaks,spindle problems or hydraulic
leaks. Check lube pressure and flow.
Check both pit ventilation fans for proper operation
Check C&C Shear and ventilation operation. Look for leaks or loose bolts.
(shear #6 or cobble shear)
Check 4 Crank Shear and ventilation operation. Look for leaks or loose bolts,
ensure there are a
spare set of belts on standby.
Check bar gauge chiller control panel for alarms and record the operating
Notes
Temp,Notes
Check bar gauge chiller control panel for alarms and record the operating temperature:
Other Notes:
Cooling Bed Area
OK
Needs Repair
Repaired
Notes (below)
Check the run in rolls. Reset any trips during delays. Tag any
unresolved problems at the breaker and ensure REC tag is entered.
Check Rake system mechanical and electrical operation, check ventilation and lube motors
Check the Chain #1 mechanical and electrical operation, check ventilation motors
Check the Chain #2 mechanical and electrical operation, check ventilation motors
Check the Chain #2 Lift / Lower mechanical and electrical operation
Check the run out rolls. Reset any trips during delays. Tag any unresolved
problems at the breaker and ensure REC tag is entered.
Check Wiper system mechanical, hydraulic and electrical operation.
Check ventilation and lube motors, record lube level and pressure:
Check cooling bed hydraulic unit for proper pressure, proper tank level
and leaks, note pressure and temp.
#1
Check cooling bed hydraulic unit for proper pressure, proper tank level
and leaks, note pressure and temp.
#2
Check cooling bed hydraulic unit for proper pressure, proper tank
Notes
PSI, Temp, Level, Notes:
Check Wiper system mechanical, hydraulic and electrical operation.
Check ventilation and lube motors, record lube level and pressure:
Check cooling bed hydraulic unit for proper pressure, proper tank level
and leaks, note pressure and temp.
#1
Check cooling bed hydraulic unit for proper pressure, proper tank level
and leaks, note pressure and temp.
#2
Other Notes:
Air Compressor Area
OK
Needs Repair
Repaired
Notes (below)
Check air compressors operation and oil levels. Record which
units are running, air temperature and pressure. #1
Check air compressors operation and oil levels. Record which
units are running, air temperature and pressure. #2
Check air compressors operation and oil levels. Record which
units are running, air temperature and pressure. #3
Check air dryers. Record which unit is running and note air temperature. #1
Check air dryers. Record which unit is running and note air temperature. #2
Check air dryers. Record which unit is running and note air temperature. #3
Notes
PSI, Temp, Notes
Check air compressors operation and oil levels. Record which
units are running, air temperature and pressure. #1
Check air compressors operation and oil levels. Record which
units are running, air temperature and pressure. #2
Check air compressors operation and oil levels. Record which
units are running, air temperature and pressure. #3
Check air dryers. Record which unit is running and note air temperature. #1
Check air dryers. Record which unit is running and note air temperature. #2
Check air dryers. Record which unit is running and note air temperature. #3
Other Notes:
Other Notes:
R7 Drive Notes
Faults/Issues/Blown Fuses/Fan Function Etc.
R7 Drives
QMOS
OK
Needs Repair
Repaired
Notes (below)
Check & record delays on this sheet for your shift with your shift partners.
Make sure information is recorded correctly and with as much detail as possible.
If there are problems contact the speed operator and ask for corrections.
Pass information on to next shift and cell owners.
QMOS DELAYS
Elec Day%
Mech Day%
Elec Month%
Mech Month%
Elec YTD%
Mech YTD%
Check & record delays on this sheet for your shift with your
shift partners.Make sure information is recorded correctly and
with as much detailas possible.If there are problems contact the speed
operator and ask for corrections.Pass information on to
next shift and cell owners.
DELAY NOTES
Notes
CHECK DELAYS FOR YOUR SHIFT WITH YOUR
SHIFT PARTNERS. MAKE SURE INFORMATION
IS RECORDED CORRECTLY & WITH AS MUCH
DETAIL AS POSSIBLE. IF THERE ARE PROBLEMS
CONTACT THE SPEED PULPIT OPERATOR AND ASK
FOR CORRECTIONS.PASS INFORMATION ON TO
NEXT SHIFT AND DAY SHOP.
USE EMAIL TO INFORM GROUP IF NEEDED.
Notes:
Submit
Print Form
Should be Empty: