• Vehicle Prestart

    Online Checklist
    Vehicle Prestart

  • The Vehicle Prestart Checklist must be completed at the commencement of the use of the vehicle and:

    - Every Monday onwards (Sedans and Utes)

    - Every operational day (Cranes, Crane Trucks, Forklifts and Trailers)

     

    Example:

    Long use - If the sedan or ute is being used by the operator on a regular basis they only need to complete the checklist when they take possession of the vehicle and every Monday thereafter.

    Short use - If the sedan or ute is to be used by several other operators in short succession, each operator will need to complete a check each time they take possession of the vehicle.

    The above example does not pertain to specialised vehicles and plant. All vehicles, other than sedans and utes (crane trucks, cranes, forklifts and trailers etc...) require a Vehicle Prestart to be completed daily.

     

    Client / Principle Contractor Requirements

    Where the Client or PC requires a different schedule to the above, all staff must follow the directions of the Client / PC.

    Example: PC requires a Vehicle Prestart to be completed each day.

    Do you need to review the vehicles prestart history?

    Go to the JNJ Staff Portal / Reports / Vehicle Prestart Checklist Report to check what's been recorded. 
  • What type of vehicle/equipment are you completing the prestart on?

  • Date*
     / /
  •  :
  • If applicable, are all Lock Pins (Ex: Tray / Trailer) in place?*
  • If applicable, is the Vehicle/Equipment's drive belt in good working order ?*

  • Checking the condition of the Timing Belt

  • The vehicles lift / restraint equipment (Ex: Chains, Ropes, Ratchet Straps, etc...) has been checked and is in good working order?*
  • If applicable, Is there a working flashlight and spare batteries present within the vehicle?*
  • If applicable, is there a working radio and spare batteries present within the vehicle?*
  • If applicable, is there a working gas detector and spare batteries present within the vehicle?*
  • Is there any new, not previously recorded, damage to the Vehicle/Equipment?*
  • If applicable, are the wipers / washers working correctly*
  • Is there a well maintained first aid kit stored within the vehicle? *
  • Is the load capacity data plate fitted, legible and correct *
  • Upload a File
    Cancelof

  • Corrective and Preventive Actions (CaPA)

    are improvements to a company's processes taken to eliminate causes of non-conformities, incidents, hazards or other undesirable situations. It is a set of actions that are to be taken and implemented to rectify and eliminate the recurrence of the issue. The information entered into this section of the report will be displayed on the JNJ Corrective and Preventive Action register and will be monitored and reported on by members of JNJ Mech Management.  Issues pertaining to Safety, Quality, Environment can all be actioned via the CaPA register. 

    For more information pertaining to CaPA please watch the following videos:

     

  • Based on the information you have provided above, do Corrective or Preventive Actions need to be logged?*

  • Checklist Entry Number: {reportEntry}

    You will receive an email on submission of this report, however, it is recommended that you keep a record of this number as you may be required to reference it later.

  • DOC NO: FOR031-Online
    Revision No: 002
    Supersedes Revision No: 001
    Approval Date: 21/07/2017
    Issue Date: 21/07/2017

  • Should be Empty: