• Zipper Check

  • Image-75
  • Image-87
  • Good news! The Classic BellyFit Extender will zip right into your jacket. 

    IMPORTANT: The Classic BellyFit Extender uses a different zip than the Universal Jacket Extender.

    (No Adapter required).

    Please note that the BellyFit is 27" long so if your jacket is a little longer, you might have a slight gap at the top. A scarf may be required.

  • Zip Adapter needed: V5 LONG

    Alternative: Universal Jacket Extender

    The V5 LONG is an adapter that will move the Classic BellyFit (27") up by 5" from the bottom of your jacket so that it sits at a better height. The top of the BellyFit will sit at 32" from the bottom of your jacket. We recommend measuring up 32" from the bottom of your zip to see where the top will sit and if any remaining gap at the top is still acceptable. A scarf may be required.

    The main benefit of having the BellyFit repositioned on your longer jacket as opposed to having a longer panel is that you will still be able to reach the zips even once it becomes impossible to bend down or reach down to zip up a longer jacket (big belly or baby-carrying eventually get in the way ;) )

     

  • Good news! The Classic BellyFit Extender will zip right into your jacket.

    IMPORTANT: The Classic BellyFit Extender uses a different zip than the Universal Jacket Extender.

    (No Adapter required).

    Please note that the BellyFit is 27" so you will have a little extra on the top. Most of our customers roll/fold the top of the BellyFit either back down inside the jacket or on the outside. The snaps can also also be used to snap it down. The simplest approach is to unsnap the top button and fold the top of the BellyFit down flat inside your jacket for a clean, comfortable look. 

  • Adapter needed: None available.

    Suggested product: Universal Jacket Extender

  • Adapter needed: None available.

    Suggested product: Universal Jacket Extender

    The Universal Jacket Extender includes an adapter that will slide onto your zip.

  • Zip Adapter needed: V10

    Alternative: Universal Jacket Extender

    Please note that the BellyFit and adapters are 27" so if your zip is under 27" you will have a little extra on the top. In this situation, most of our customers roll/fold the top of the BellyFit and adapter either back down inside the jacket or on the outside. Some even use the snaps to snap it down. The simplest approach is to unsnap the top button and fold the top of the BellyFit down flat inside your jacket for a clean, comfortable look. 

  • Zip Adapter needed: V10 LONG

    Alternative: Universal Jacket Extender

    The V10 LONG is an adapter that will move the Classic BellyFit (27") up by 5" from the bottom of your jacket so that it sits at a better height. The top of the BellyFit will sit at 32" from the bottom of your jacket. We recommend measuring up 32" from the bottom of your zip to see where the top will sit and if any remaining gap at the top is still acceptable. A scarf may be required.

    The main benefit of having the BellyFit repositioned on your longer jacket as opposed to having a longer panel is that you will still be able to reach the zips even once it becomes impossible to bend down or reach down to zip up a longer jacket (big belly or baby-carrying eventually get in the way ;) )

  • Zip Adapter needed: V10

    Alternative: Universal Jacket Extender

    Please note that the BellyFit and adapters are 27" so you will have a little extra on the top. In this situation, most of our customers roll/fold the top of the BellyFit and adapter either back down inside the jacket or on the outside. Some even use the snaps to snap it down. The simplest approach is to unsnap the top button and fold the top of the BellyFit down flat inside your jacket for a clean, comfortable look. 

     

  • Zip Adapter needed: V3

    Alternative: Universal Jacket Extender

    Please note that the BellyFit and adapters are 27" so if your zip is under 27" you will have a little extra on the top. In this situation, most of our customers roll/fold the top of the BellyFit and adapter either back down inside the jacket or on the outside. Some even use the snaps to snap it down. The simplest approach is to unsnap the top button and fold the top of the BellyFit down flat inside your jacket for a clean, comfortable look. 

     

  • Zip Adapter needed: C1

    Alternative: Universal Jacket Extender

    Please note that the BellyFit and adapters are 27" so if your zip is under 27" you will have a little extra on the top. In this situation, most of our customers roll/fold the top of the BellyFit and adapter either back down inside the jacket or on the outside. Some even use the snaps to snap it down. The simplest approach is to unsnap the top button and fold the top of the BellyFit down flat inside your jacket for a clean, comfortable look. 

     

  • Zip Adapter needed: C2

    Alternative: Universal Jacket Extender

    Please note that the BellyFit and adapters are 27" so if your zip is under 27" you will have a little extra on the top. In this situation, most of our customers roll/fold the top of the BellyFit and adapter either back down inside the jacket or on the outside. Some even use the snaps to snap it down. The simplest approach is to unsnap the top button and fold the top of the BellyFit down flat inside your jacket for a clean, comfortable look. 

     

  • Zip Adapter needed: M10

    Alternative: Universal Jacket Extender

    Please note that the BellyFit and adapters are 27" so if your zip is under 27" you will have a little extra on the top. In this situation, most of our customers roll/fold the top of the BellyFit and adapter either back down inside the jacket or on the outside. Some even use the snaps to snap it down. The simplest approach is to unsnap the top button and fold the top of the BellyFit down flat inside your jacket for a clean, comfortable look.  

  • Zip Adapter needed: M1

    Alternative: Universal Jacket Extender

    Please note that the BellyFit and adapters are 27" so if your zip is under 27" you will have a little extra on the top. In this situation, most of our customers roll/fold the top of the BellyFit and adapter either back down inside the jacket or on the outside. Some even use the snaps to snap it down. The simplest approach is to unsnap the top button and fold the top of the BellyFit down flat inside your jacket for a clean, comfortable look. 

     

  • Zip Adapter needed: M1

    Alternative: Universal Jacket Extender

    Please note that the BellyFit and adapters are 27" so you will have a little extra on the top. In this situation, most of our customers roll/fold the top of the BellyFit and adapter either back down inside the jacket or on the outside. Some even use the snaps to snap it down. The simplest approach is to unsnap the top button and fold the top of the BellyFit down flat inside your jacket for a clean, comfortable look. 

     

  • Zip Adapter needed: M2

    Alternative: Universal Jacket Extender

    Please note that the BellyFit and adapters are 27" so if your zip is under 27" you will have a little extra on the top. In this situation, most of our customers roll/fold the top of the BellyFit and adapter either back down inside the jacket or on the outside. Some even use the snaps to snap it down. The simplest approach is to unsnap the top button and fold the top of the BellyFit down flat inside your jacket for a clean, comfortable look. 

     

  • Zip Adapter needed: M2

    Alternative: Universal Jacket Extender

    Please note that the BellyFit and adapters are 27" so you will have a little extra on the top. In this situation, most of our customers roll/fold the top of the BellyFit and adapter either back down inside the jacket or on the outside. Some even use the snaps to snap it down. The simplest approach is to unsnap the top button and fold the top of the BellyFit down flat inside your jacket for a clean, comfortable look.

     

  • Zip Adapter needed: C3

    Alternative: Universal Jacket Extender

    Please note that the BellyFit and adapters are 27" so if your zip is under 27" you will have a little extra on the top. In this situation, most of our customers roll/fold the top of the BellyFit and adapter either back down inside the jacket or on the outside. Some even use the snaps to snap it down. The simplest approach is to unsnap the top button and fold the top of the BellyFit down flat inside your jacket for a clean, comfortable look.

     

  • Zip Adapter needed: C3 LONG

    Alternative: Universal Jacket Extender

    The C3 LONG is an adapter that will move the BellyFit (27") up by 5" from the bottom of your jacket so that it sits at a better height. The top of the BellyFit will sit at 32" from the bottom of your jacket. We recommend measuring up 32" from the bottom of your zip to see where the top will sit and if any remaining gap at the top is still acceptable. A scarf may be required.

    The main benefit of having the BellyFit repositioned on your longer jacket as opposed to having a longer panel is that you will still be able to reach the zips even once it becomes impossible to bend down or reach down to zip up a longer jacket (big belly or baby-carrying eventually get in the way ;) 

  • Zip Adapter needed: C3

    Alternative: Universal Jacket Extender

    Please note that the BellyFit and adapters are 27" so you will have a little extra on the top. In this situation, most of our customers roll/fold the top of the BellyFit and adapter either back down inside the jacket or on the outside. Some even use the snaps to snap it down. The simplest approach is to unsnap the top button and fold the top of the BellyFit down flat inside your jacket for a clean, comfortable look. 

  • Zip Adapter needed: C4

    Alternative: Universal Jacket Extender

    Please note that the BellyFit and adapters are 27" so if your zip is under 27" you will have a little extra on the top. In this situation, most of our customers roll/fold the top of the BellyFit and adapter either back down inside the jacket or on the outside. Some even use the snaps to snap it down. The simplest approach is to unsnap the top button and fold the top of the BellyFit down flat inside your jacket for a clean, comfortable look. 

     

  • Zip Adapter needed: C4

    Alternative: Universal Jacket Extender

    Please note that the BellyFit and adapters are 27" so you will have a little extra on the top. In this situation, most of our customers roll/fold the top of the BellyFit and adapter either back down inside the jacket or on the outside. Some even use the snaps to snap it down. The simplest approach is to unsnap the top button and fold the top of the BellyFit down flat inside your jacket for a clean, comfortable look. 

     

  •  
  • Should be Empty: