CCTV Service Checklist

1
Site Check-in:* This field is required.
Check in with client onsite & advise them that you are onsite to test the system
Signed in on visitor register and you have required PPE gear
Building alterations or changes in usage of any area have not reduced the effectiveness of the system
Installation, location and site of all equipment devices match the equipment record
Window stickers & Gate sign are in GOOD condition
Verify the user knows how to operate the system
2
System:* This field is required.
Screen Resolution is set to 1920 x 1080 (or maximum that monitor can handle)
Time Zone is set to GMT+12:00
DST is Enabled and set for Last Sun of Sep @ 2am -> First Sun of Apr @ 3am
NTP Enabled and set to nz.pool.ntp.org (if connected to internet)
3
Type of CCTV System* This field is required.HDCVI is considered High Definition ANALOG
IP Only
Analog Only
IP & Analog (Hybrid)
4
Analog/CVI Checklist:* This field is required.This section applies to any BNC or Balun connected cameras
Time & Date on Cameras are consistent and match with the DVR
Camera Labels are correct (ie, not Camera 01, 02 etc)
Camera's are positioned well (not pointing at crazy angles)
Camera's are clean and cobweb free
BNC's are in good condition and aren't frayed or falling apart
PSU's are in good condition and wiring is secure to prevent shorts or power loss
Analog Images is stable and not rolling or jumping
Other
5
IP Checklist:* This field is required.
Time & Date on Cameras are consistent and match with the NVR
Camera Labels are correct (ie, not Camera 01, 02 etc)
Camera's are positioned well (not pointing at crazy angles)
Camera's are clean and cobweb free
All Camera Encode settings are set optimally? (See next option)
IP Boxes properly sealed
Visually inspected RJ45 connectors for corrosion if possible
Other
6
Encoding:* This field is required.All Camera Encode settings are set optimally? (See below)
MAIN STREAM Stream = Normal Bit Rate = 2048Kbps Frame Rate = 12 Image Quality = Highest (Change Stream from Normal to Event and repeat)
SUB STREAM Resolution = 720*576(D1) Bitrate Type = CBR Bit Rate(Kbps) = 320 Frame Rate = 10
Other
7
Alarms & Events:* This field is required.
Motion is enabled and individually checked to make sure that each camera has a motion grid.
Correct Sensitivity and Records on motion detection?
Playback shows reliable motion detection of footage?
Other
8
Recording Schedule:* This field is required.
24 Hour Motion
24 Hour Continuous
24 Hour Motion & Continuous
Custom Schedule (eg, Bridgestone)
9
Total Hard Drive Storage:* This field is required.enter a value in Terabytes
10
OSD:* This field is required.
Show Time is enabled and located at the top left corner of the screen
Show Name is enabled and located at bottom right corner of the screen.
Font Size = Small
Other
11
Image:* This field is required.
WDR is only enabled as required (not just for the hell of it)
WDR Level isn't over 3 (Anything higher makes night footage bad)
Other
12
Footage Retention:* This field is required.Go into Playback and select a camera, then see how many weeks/months you can go back to *PRO TIP: Ask Siri/Google "how many days ago was (earliest date)?" and you will get a quick answer!
How many days are being held in playback?
13
Job Ticket Number:* This field is required.
This can be found in the Job Ticket PDF
Should be Empty: