Stormcrete Installation Certification Exam

Your Information

Name*

First NameLast Name

Project Name:

Company*

Title*

Phone*

Mobile

E-mail*

Office Address*

Street Address

Street Address Line 2

CityState / Province

Postal / Zip Code

Date*

Date

Stormcrete® Precast Porous Concrete Certified Installer Program Exam Questions

(You must get 15/19 questions right to obtain the certification.)

Please find and review the Stormcrete Shipping and Handling Manual at the link below:

Stormcrete Handling and Installation Manual

A. Hand RakingB. ScreedingC. The panels will self-level on their ownD. Vibration

A. Use heavy duty rope.B. Use forklift forks under every panel.C. Use slings under the panels.D. Use a 2 or 4-way chain sling and lifting swivels.

A. 6"B. 4"C. 3"D. A saw is not required. Use a utility knife to score and snap it

A. Backer Rod (closed cell foam) with Sikaflex.B. There is no joint filler required. Asphalt may be placed directly against the Stormcrete® panel.C. 1/2" thick bituminous expansion Joint material.D. 1/2" open joint.

A. Backer Rod (closed cell foam) with SikaflexB. There is no joint filler required. Concrete may be placed directly against the Stormcrete® panel.C. 1/2" thick bituminous expansion Joint material.D. Both A or C

A. Cover panels with material adequate to prevent contamination by debris.B. Use a backpack blower to blow the debris away from the installation area and panel.C. Use sediment and erosion control barriers to stop any loose debris from entering the installation area.D. All of the above.

A. RakesB. Nothing, it will self compact.C. Walk behind plate compactor.D. None of the above.

TrueFalse

A. Cut the panel in half to match the two grades.B. Screed the stone to create a transition grade and place the slab.C. Nothing, the panel will settle.D. Both A or B

A. Use a backpack blower to remove the debris.B. Spray it with a hose and let it wash through.C. Use a broom to brush the debris off.D. Schedule a vacuum sweeper to clean the surface.

A. Subgrade soils are saturated.B. Frozen subgrade.C. Heavy rain is forecast.D. Both A and B

A. 2 weeks after installation.B. 30 days after the panels settle.C. Immediately after completion of the installation.

TrueFalse

A. Cover adjacent areas of panel to prevent dust and debris from plugging the panel.B. Cut away from the sub-base.C. Make sure not to cut the panels while they are stackedD. All of the above

A. You should walk around the panel to ensure that it has not been damaged in handling.B. You should inspect the bottom of each panel to ensure there are no spacers stuck to the bottomC. Screeding stone is leveled and prepared for Stormcrete® panelsD. All of the Above

A. Immediately upon receipt.B. No later than 8 hrs. after receiptC. Within one week of delivery date.D. Both A and B

A. There is no required spacing between panels.B. 1/2" by using 1/2" thick bituminous expansion joint.C. 1/2" by using Backer rod (closed cell foam) with Sikaflex.D. 1/8" open joint by using 1/8" HDPE spacer plates.

TrueFalse

By entering my full name below, I certify that I am the person taking this test on the specified date. As a Certified Stormcrete® System installer I am responsible for reviewing the Stormcrete® Handling and Installation Manual and the Certification questions with corrected answers with the laborers under my supervision.*

NAME