Good news! The BellyFit will zip right into your jacket. 

(No Adapter required).

Please note that the BellyFit is 27" long so if your jacket is a little longer, you might have a slight gap at the top. A scarf may be required.

Zip Adapter needed: V5 LONG or Universal Adapter

The V5 LONG is an adapter that will move the BellyFit (27") up by 5" from the bottom of your jacket so that it sits at a better height. The top of the BellyFit will sit at 32" from the bottom of your jacket. We recommend measuring up 32" from the bottom of your zip to see where the top will sit and if any remaining gap at the top is still acceptable. A scarf may be required.

The main benefit of having the BellyFit repositioned on your longer jacket as opposed to having a longer panel is that you will still be able to reach the zips even once it becomes impossible to bend down or reach down to zip up a longer jacket (big belly or baby-carrying eventually get in the way ;) )

With the Universal Adapter, you can simply slide the Universal along your zip until it is sitting at a comfortable height. Additional clips (included) can further secure the Universal in place.

The Universal Adapter can be bought separately or as a combo with the BellyFit - called the Universal Jacket Extender.

Good news! The BellyFit will zip right into your jacket.

(No Adapter required).

Please note that the BellyFit is 27" so you will have a little extra on the top. Most of our customers roll/fold the top of the BellyFit either back down inside the jacket or on the outside. The snaps can also also be used to snap it down. The simplest approach is to unsnap the top button and fold the top of the BellyFit down flat inside your jacket for a clean, comfortable look. 

Adapter needed: Universal Adapter

The Universal Adapter will slide onto your zip and allow you to use the BellyFit. The Universal Adapter can be bought separately or as a combo with the BellyFit - called the Universal Jacket Extender.

For shorter zips (less than 27" long), the top of the Universal Adapter can be folded down and secured onto the top of your zip making it suitable for use on shorter jackets. The top of the BellyFit can be folded and snapped down to make it shorter too. 

For longer zips (27" and greater), the Universal Adapter can be repositioned along your zip until it is sitting at a comfortable height. Additional clips (included) can further secure the Universal in place.

Zip Adapter needed: V10 or Universal Adapter

Please note that the BellyFit and Zip Adapters are 27" so if your zip is under 27" you will have a little extra on the top. In this situation, most of our customers roll/fold the top of the BellyFit and adapter either back down inside the jacket or on the outside. Some even use the snaps to snap it down. The simplest approach is to unsnap the top button and fold the top of the BellyFit down flat inside your jacket for a clean, comfortable look. 

The top of the Universal Adapter can be folded down and secured onto the top of your zip making it suitable for use on shorter jackets. As described above, the top of the BellyFit can also be folded and snapped down to make it shorter too.

If your zip is longer than 27", it is possible to reposition the Universal Adapter a little higher up at a more comfortable height.

The Universal Adapter can be bought separately or as a combo with the BellyFit - called the Universal Jacket Extender.

Zip Adapter needed: V10 LONG or Universal Adapter

The V10 LONG is an adapter that will move the BellyFit (27") up by 5" from the bottom of your jacket so that it sits at a better height. The top of the BellyFit will sit at 32" from the bottom of your jacket. We recommend measuring up 32" from the bottom of your zip to see where the top will sit and if any remaining gap at the top is still acceptable. A scarf may be required.

The main benefit of having the BellyFit repositioned on your longer jacket as opposed to having a longer panel is that you will still be able to reach the zips even once it becomes impossible to bend down or reach down to zip up a longer jacket (big belly or baby-carrying eventually get in the way ;) )

With the Universal Adapter, you can simply slide the Universal along your zip until it is sitting at a comfortable height. Additional clips (included) can further secure the Universal in place.

The Universal Adapter can be bought separately or as a combo with the BellyFit - called the Universal Jacket Extender.

Zip Adapter needed: V10 or Universal Adapter

Please note that the BellyFit and Zip Adapters are 27" so you will have a little extra on the top. In this situation, most of our customers roll/fold the top of the BellyFit and adapter either back down inside the jacket or on the outside. Some even use the snaps to snap it down. The simplest approach is to unsnap the top button and fold the top of the BellyFit down flat inside your jacket for a clean, comfortable look. 

The top of the Universal Adapter can be folded down and secured onto the top of your zip making it suitable for use on shorter jackets. As described above, the top of the BellyFit can also be folded and snapped down to make it shorter too.

The Universal Adapter can be bought separately or as a combo with the BellyFit - called the Universal Jacket Extender.

Zip Adapter needed: V3 or Universal Adapter

Please note that the BellyFit and Zip Adapters are 27" so if your zip is under 27" you will have a little extra on the top. In this situation, most of our customers roll/fold the top of the BellyFit and adapter either back down inside the jacket or on the outside. Some even use the snaps to snap it down. The simplest approach is to unsnap the top button and fold the top of the BellyFit down flat inside your jacket for a clean, comfortable look. 

The top of the Universal Adapter can be folded down and secured onto the top of your zip making it suitable for use on shorter jackets. As described above, the top of the BellyFit can also be folded and snapped down to make it shorter too.

If your zip is longer than 27", it is possible to reposition the Universal Adapter a little higher up at a more comfortable height.

The Universal Adapter can be bought separately or as a combo with the BellyFit - called the Universal Jacket Extender.

Zip Adapter needed: C1 or Universal Adapter

Please note that the BellyFit and Zip Adapters are 27" so if your zip is under 27" you will have a little extra on the top. In this situation, most of our customers roll/fold the top of the BellyFit and adapter either back down inside the jacket or on the outside. Some even use the snaps to snap it down. The simplest approach is to unsnap the top button and fold the top of the BellyFit down flat inside your jacket for a clean, comfortable look. 

The top of the Universal Adapter can be folded down and secured onto the top of your zip making it suitable for use on shorter jackets. As described above, the top of the BellyFit can also be folded and snapped down to make it shorter too.

If your zip is longer than 27", it is possible to reposition the Universal Adapter a little higher up at a more comfortable height.

The Universal Adapter can be bought separately or as a combo with the BellyFit - called the Universal Jacket Extender.

Zip Adapter needed: C2 or Universal Adapter

Please note that the BellyFit and Zip Adapters are 27" so if your zip is under 27" you will have a little extra on the top. In this situation, most of our customers roll/fold the top of the BellyFit and adapter either back down inside the jacket or on the outside. Some even use the snaps to snap it down. The simplest approach is to unsnap the top button and fold the top of the BellyFit down flat inside your jacket for a clean, comfortable look. 

The top of the Universal Adapter can be folded down and secured onto the top of your zip making it suitable for use on shorter jackets. As described above, the top of the BellyFit can also be folded and snapped down to make it shorter too.

If your zip is longer than 27", it is possible to reposition the Universal Adapter a little higher up at a more comfortable height.

The Universal Adapter can be bought separately or as a combo with the BellyFit - called the Universal Jacket Extender.

Zip Adapter needed: M10 or Universal Adapter

Please note that the BellyFit and Zip Adapters are 27" so if your zip is under 27" you will have a little extra on the top. In this situation, most of our customers roll/fold the top of the BellyFit and adapter either back down inside the jacket or on the outside. Some even use the snaps to snap it down. The simplest approach is to unsnap the top button and fold the top of the BellyFit down flat inside your jacket for a clean, comfortable look. 

The top of the Universal Adapter can be folded down and secured onto the top of your zip making it suitable for use on shorter jackets. As described above, the top of the BellyFit can also be folded and snapped down to make it shorter too.

If your zip is longer than 27", it is possible to reposition the Universal Adapter a little higher up at a more comfortable height.

The Universal Adapter can be bought separately or as a combo with the BellyFit - called the Universal Jacket Extender.

Zip Adapter needed: M1 or Universal Adapter

Please note that the BellyFit and Zip Adapters are 27" so if your zip is under 27" you will have a little extra on the top. In this situation, most of our customers roll/fold the top of the BellyFit and adapter either back down inside the jacket or on the outside. Some even use the snaps to snap it down. The simplest approach is to unsnap the top button and fold the top of the BellyFit down flat inside your jacket for a clean, comfortable look. 

The top of the Universal Adapter can be folded down and secured onto the top of your zip making it suitable for use on shorter jackets. As described above, the top of the BellyFit can also be folded and snapped down to make it shorter too.

If your zip is longer than 27", it is possible to reposition the Universal Adapter a little higher up at a more comfortable height.

The Universal Adapter can be bought separately or as a combo with the BellyFit - called the Universal Jacket Extender.

Zip Adapter needed: M1 or Universal Adapter

Please note that the BellyFit and Zip Adapters are 27" so you will have a little extra on the top. In this situation, most of our customers roll/fold the top of the BellyFit and adapter either back down inside the jacket or on the outside. Some even use the snaps to snap it down. The simplest approach is to unsnap the top button and fold the top of the BellyFit down flat inside your jacket for a clean, comfortable look. 

The top of the Universal Adapter can be folded down and secured onto the top of your zip making it suitable for use on shorter jackets. As described above, the top of the BellyFit can also be folded and snapped down to make it shorter too.

The Universal Adapter can be bought separately or as a combo with the BellyFit - called the Universal Jacket Extender.

Zip Adapter needed: M2 or Universal Adapter

Please note that the BellyFit and Zip Adapters are 27" so if your zip is under 27" you will have a little extra on the top. In this situation, most of our customers roll/fold the top of the BellyFit and adapter either back down inside the jacket or on the outside. Some even use the snaps to snap it down. The simplest approach is to unsnap the top button and fold the top of the BellyFit down flat inside your jacket for a clean, comfortable look. 

The top of the Universal Adapter can be folded down and secured onto the top of your zip making it suitable for use on shorter jackets. As described above, the top of the BellyFit can also be folded and snapped down to make it shorter too.

If your zip is longer than 27", it is possible to reposition the Universal Adapter a little higher up at a more comfortable height.

The Universal Adapter can be bought separately or as a combo with the BellyFit - called the Universal Jacket Extender.

Zip Adapter needed: M2 or Universal Adapter

Please note that the BellyFit and Zip Adapters are 27" so you will have a little extra on the top. In this situation, most of our customers roll/fold the top of the BellyFit and adapter either back down inside the jacket or on the outside. Some even use the snaps to snap it down. The simplest approach is to unsnap the top button and fold the top of the BellyFit down flat inside your jacket for a clean, comfortable look. 

The top of the Universal Adapter can be folded down and secured onto the top of your zip making it suitable for use on shorter jackets. As described above, the top of the BellyFit can also be folded and snapped down to make it shorter too.

The Universal Adapter can be bought separately or as a combo with the BellyFit - called the Universal Jacket Extender.

Zip Adapter needed: C3 or Universal Adapter

Please note that the BellyFit and Zip Adapters are 27" so if your zip is under 27" you will have a little extra on the top. In this situation, most of our customers roll/fold the top of the BellyFit and adapter either back down inside the jacket or on the outside. Some even use the snaps to snap it down. The simplest approach is to unsnap the top button and fold the top of the BellyFit down flat inside your jacket for a clean, comfortable look. 

The top of the Universal Adapter can be folded down and secured onto the top of your zip making it suitable for use on shorter jackets. As described above, the top of the BellyFit can also be folded and snapped down to make it shorter too.

If your zip is longer than 27", it is possible to reposition the Universal Adapter a little higher up at a more comfortable height. 

The Universal Adapter can be bought separately or as a combo with the BellyFit - called the Universal Jacket Extender.

Zip Adapter needed: C3 LONG or Universal Adapter

The C3 LONG is an adapter that will move the BellyFit (27") up by 5" from the bottom of your jacket so that it sits at a better height. The top of the BellyFit will sit at 32" from the bottom of your jacket. We recommend measuring up 32" from the bottom of your zip to see where the top will sit and if any remaining gap at the top is still acceptable. A scarf may be required.

The main benefit of having the BellyFit repositioned on your longer jacket as opposed to having a longer panel is that you will still be able to reach the zips even once it becomes impossible to bend down or reach down to zip up a longer jacket (big belly or baby-carrying eventually get in the way ;) )

With the Universal Adapter, you can simply slide the Universal along your zip until it is sitting at a comfortable height. Additional clips (included) can further secure the Universal in place.

The Universal Adapter can be bought separately or as a combo with the BellyFit - called the Universal Jacket Extender.

Zip Adapter needed: C3 or Universal Adapter

Please note that the BellyFit and Zip Adapters are 27" so you will have a little extra on the top. In this situation, most of our customers roll/fold the top of the BellyFit and adapter either back down inside the jacket or on the outside. Some even use the snaps to snap it down. The simplest approach is to unsnap the top button and fold the top of the BellyFit down flat inside your jacket for a clean, comfortable look. 

The top of the Universal Adapter can be folded down and secured onto the top of your zip making it suitable for use on shorter jackets. As described above, the top of the BellyFit can also be folded and snapped down to make it shorter too.

The Universal Adapter can be bought separately or as a combo with the BellyFit - called the Universal Jacket Extender.

Zip Adapter needed: C4 or Universal Adapter

Please note that the BellyFit and Zip Adapters are 27" so if your zip is under 27" you will have a little extra on the top. In this situation, most of our customers roll/fold the top of the BellyFit and adapter either back down inside the jacket or on the outside. Some even use the snaps to snap it down. The simplest approach is to unsnap the top button and fold the top of the BellyFit down flat inside your jacket for a clean, comfortable look. 

The top of the Universal Adapter can be folded down and secured onto the top of your zip making it suitable for use on shorter jackets. As described above, the top of the BellyFit can also be folded and snapped down to make it shorter too.

If your zip is longer than 27", it is possible to reposition the Universal Adapter a little higher up at a more comfortable height. 

The Universal Adapter can be bought separately or as a combo with the BellyFit - called the Universal Jacket Extender.

Zip Adapter needed: C4 or Universal Adapter

Please note that the BellyFit and Zip Adapters are 27" so you will have a little extra on the top. In this situation, most of our customers roll/fold the top of the BellyFit and adapter either back down inside the jacket or on the outside. Some even use the snaps to snap it down. The simplest approach is to unsnap the top button and fold the top of the BellyFit down flat inside your jacket for a clean, comfortable look. 

The top of the Universal Adapter can be folded down and secured onto the top of your zip making it suitable for use on shorter jackets. As described above, the top of the BellyFit can also be folded and snapped down to make it shorter too.

The Universal Adapter can be bought separately or as a combo with the BellyFit - called the Universal Jacket Extender.