• Part Selector

  • “Dip Switches” – Check the Controller board heat-shrinked in your Power Harness. If the board has 4 visible micro dip switches, then select “Y”, otherwise select “N” (Note: Controller boards with dip switches measure 2” x .5” [55mm x 13mm], boards without dip switches measure 2.5” x 1” [70mm x 25mm])

  • “Connection Type” = Check the connector mounted inside your case. If the connector is Round, then select “R1”. If it is Rectangular, then select “R2”

  • Part#: 1H2M18R

    Replacement case harnesses (two) for side case applications:
    • Male
    • 2-pin
    • Right angle
    • Loose end (wire colors: red/green, red/yellow)
    • Cable length: 18″ (approximate)

  • Part#: 1H3M20RY

    Replacement case harness for topcase and bi-color sidecase applications:
    • Male (other end with 3 pin, flat, female connector)
    • 3-pin
    • Right angle
    • Cable Length: 20″ (approximate)

  • Part#: 1H5MR-E55

    Replacement case harness for LED55-T-TS light kit.

    Power Harness: DIP switches (No)

    Case Cable Connector (inside case): Rectangular

    Harness includes 5-pin male connector to mount in topcase. Other end of harness has 2 X 3-pin flat, black, female connectors to connect to LED55-T-TS LED arrays.

     

  • Part#: 1H5MR-E55-C+

    Replacement case harness for LED55-T-TS light kit.

    Power Harness: DIP switches (No)

    Case Cable Connector (inside case): Round

    Harness includes 5-pin male connector to mount in topcase. Other end of harness has 2 X 3-pin flat, black, female connectors to connect to LED55-T-TS LED arrays.

  • Part#: TCPH3

    Extra / Replacement topcase power harness.

    Are you the lucky owner of more than one motorcycle or scooter? Are you looking to be able to use your topcase with LED light kit on multiple bikes? Purchase additional Power Harnesses and you can easily transfer cases between bikes and have all of the benefits of your LED light kit on each bike! Each Power Harness comes complete with all wiring leads and weatherproof connector to connect to the existing AdMore connector on your topcase. Also included is a set of wire taps to connect the new power harness to your bike.

    Please note: You must have purchased a complete AdMore Lighting LED light kit in order to use this extra Power Harness.

    Power Harness for LED360-T-TS, LED460-T-TS, LED52-T-TS, LED370-T-TS, LED450-T-TS, LED470-T-TS, LEDV46-T-TS, LED3618-T-TS, LED4014-T-TS, or LED42-VSP-T-TS (Standard)

  • Part#: TCPH5

    Extra / Replacement topcase power harness for bi-color light kits.

    Are you the lucky owner of more than one motorcycle? Are you looking to be able to use your topcase with LED light kit on multiple bikes? Purchase additional Power Harnesses and you can easily transfer your topcase between bikes and have all of the benefits of your LED light kit on each bike! Each Power Harness comes complete with all wiring leads and weatherproof connector to connect to the existing AdMore connector on your topcase. Also included is a set of wire taps to connect the new power harness to your bike.

    Please note: You must have purchased a complete AdMore Lighting LED light kit in order to use this extra Power Harness.

     

    Power Harness: DIP switches (No)
    Case Cable Connector (inside case): Rectangular

     

  • Part#: SCPH2 

    Extra / Replacement sidecase power harness.

    Are you the lucky owner of more than one motorcycle? Are you looking to be able to use your GIVI cases with LED light kit on multiple bikes? Purchase additional Power Harnesses and you can easily transfer cases between bikes and have all of the benefits of your LED light kit on each bike! Each Power Harness comes complete with all wiring leads and weatherproof connectors to connect to the existing AdMore connectors on your GIVI cases. Also included is a set of wire taps to connect the new power harness to your bike.

    Please note: You must have purchased a complete AdMore Lighting LED light kit in order to use this extra Power Harness.

    Power Harness for LED360-S-TS, LED41-S-TS, LEDV35-S-TS, LED3618-S-TS, or LED4014-S-TS

  • Part#: SCPH3

     Extra / Replacement sidecase power harness for bi-color kits.

    Are you the lucky owner of more than one motorcycle? Are you looking to be able to use your GIVI cases with LED light kit on multiple bikes? Purchase additional Power Harnesses and you can easily transfer cases between bikes and have all of the benefits of your LED light kit on each bike! Each Power Harness comes complete with all wiring leads and weatherproof connectors to connect to the existing AdMore connectors on your GIVI cases. Also included is a set of wire taps to connect the new power harness to your bike.

    Please note: You must have purchased a complete AdMore Lighting LED light kit in order to use this extra Power Harness.

    This Power Harness is for side case applications with bi-color LEDs.

    Power Harness for LED360-S-TS (RY), LED41-S-TS (RY), LEDV35-S-TS (RY), or LED1614-S-TS (RY)

    Power Harness: DIP switches (No)

  • Part#: TCPH5-C+

    Extra / Replacement topcase power harness for bi-color light kits.

    Are you the lucky owner of more than one motorcycle? Are you looking to be able to use your topcase with LED light kit on multiple bikes? Purchase additional Power Harnesses and you can easily transfer your topcase between bikes and have all of the benefits of your LED light kit on each bike! Each Power Harness comes complete with all wiring leads and weatherproof connector to connect to the existing AdMore connector on your topcase. Also included is a set of wire taps to connect the new power harness to your bike.

    Please note: You must have purchased a complete AdMore Lighting LED light kit in order to use this extra Power Harness.

    Power Harness: DIP switches (No)
    Case Cable Connector (inside case): Round

  • Part#: TCPH5-B

    Extra / Replacement topcase power harness for bi-color, common-ground light kits.

    Are you the lucky owner of more than one motorcycle? Are you looking to be able to use your topcase with LED light kit on multiple bikes? Purchase additional Power Harnesses and you can easily transfer your topcase between bikes and have all of the benefits of your LED light kit on each bike! Each Power Harness comes complete with all wiring leads and weatherproof connector to connect to the existing AdMore connector on your topcase. Also included is a set of wire taps to connect the new power harness to your bike.

    Please note: You must have purchased a complete AdMore Lighting LED light kit in order to use this extra Power Harness.

    Power Harness: DIP switches (Yes)
    Case Cable Connector (inside case): Rectangular

     

     

  • Part#: TCPH5-CG

    Extra / Replacement topcase power harness for bi-color, common-ground light kits.

    Are you the lucky owner of more than one motorcycle? Are you looking to be able to use your topcase with LED light kit on multiple bikes? Purchase additional Power Harnesses and you can easily transfer your topcase between bikes and have all of the benefits of your LED light kit on each bike! Each Power Harness comes complete with all wiring leads and weatherproof connector to connect to the existing AdMore connector on your topcase. Also included is a set of wire taps to connect the new power harness to your bike.

    Please note: You must have purchased a complete AdMore Lighting LED light kit in order to use this extra Power Harness.

    Power Harness: DIP switches (Yes)
    Case Cable Connector (inside case): Round

  • Part#: 1H5MR-VSP

    Replacement case harness for LED55-T-TS light kit.

    Power Harness: DIP switches (No)

    Case Cable Connector (inside case): Rectangular

    Harness includes 5-pin male connector to mount in topcase. Other end of harness has 2 X 3-pin flat, black, female connectors to connect to LED55-T-TS LED arrays.

     

  • Part#: 1H5MR-VSP-C+

    Replacement case harness for bi-color (red/amber) light kits

    Power Harness: DIP switches (no)

    Case Cable Connector (inside case): Round

    Harness includes 5-pin male connector to mount in topcase. Other end of harness has 2 X 3-pin flat, black, female connectors to connect to LED arrays.

  • Part#: 1H5MR-B

    Replacement case harness for bi-color (red/amber) light kits

    Power Harness: DIP switches (Yes)

    Case Cable Connector (inside case): Rectangular

    Harness includes 5-pin male connector to mount in topcase. Other end of harness has 2 X 3-pin flat, black, female connectors to connect to LED arrays.

     

  • Part#: 1H5M80RY-CG

    Replacement case harness for bi-color (red/amber) light kits

    Power Harness: DIP switches (Yes)

    Case Cable Connector (inside case): Round

    Harness includes 5-pin male connector to mount in topcase. Other end of harness has 2 X 3-pin flat, black, female connectors to connect to LED arrays.

     

  • Part#: 1H3M20R

    Replacement case harness for topcase applications:
    • Male
    • 3-pin
    • Right angle
    • Loose end (wire colors: red, green, yellow)
    • Cable Length: 20″ (approximate)

    Power Harness: DIP switches (No)

  • Part#: 1H3M20RY

    Replacement case cable for bi-color sidecase applications:
    • Male (other end with 3 pin, flat, female connector)
    • 3-pin
    • Right angle
    • Cable Length: 20″ (approximate)

  •  

    Part#: 1H3M60RY

     

    Replacement (CG) case cable for bi-color sidecase applications:
    • Male (other end with 3 pin, flat, female connector)
    • 3-pin
    • Right angle
    • Cable Length: 20″ (approximate)

    Power Harness: DIP switches (Yes)

  • Part#: SCPH3-CG

    Extra / Replacement sidecase (CG) power harness for bi-color kits.

    Are you the lucky owner of more than one motorcycle? Are you looking to be able to use your GIVI cases with LED light kit on multiple bikes? Purchase additional Power Harnesses and you can easily transfer cases between bikes and have all of the benefits of your LED light kit on each bike! Each Power Harness comes complete with all wiring leads and weatherproof connectors to connect to the existing AdMore connectors on your GIVI cases. Also included is a set of wire taps to connect the new power harness to your bike.

    Please note: You must have purchased a complete AdMore Lighting LED light kit in order to use this extra Power Harness.

    This Power Harness is for (CG) side case applications with bi-color LEDs.

    Power Harness: DIP switches (Yes)

  • Part: A-VS1

    This E-Z Connect adapter lets you connect your AdMore light kit (or any other lighting accessory with less than a 2A current draw) without having to tap the stock wiring on your Suzuki V-Strom (’05+). Please note – this adapter will not work on the DL1000 (’14 and newer).

  • Part#: A-VS2

    This E-Z Connect adapter lets you connect your AdMore light kit (or any other lighting accessory with less than a 2A current draw) without having to tap the stock wiring on your Suzuki V-Strom DL1000 (’14 and newer).

  • Part#: A-FJR2

    This E-Z Connect adapter lets you connect your AdMore light kit (or any other lighting accessory with less than a 2A current draw) without having to tap the stock wiring on your Yamaha FJR (Gen II & Gen III).

  • Part#: A-FJR3

    This E-Z Connect adapter lets you connect your AdMore light kit (or any other lighting accessory with less than a 2A current draw) without having to tap the stock wiring on your 2016 (or newer) Yamaha FJR.

  • Part#: A-KAW1

    This E-Z Connect adapter lets you connect your AdMore light kit (or any other lighting accessory with less than a 2A current draw) without having to tap the stock wiring on your Kawasaki Concours 1400 (’08- Current).

  • Part#: A-GL18FL

    This adapter will allow you to unlock the full features of the SoCal Pathfinder lights mounted on your Honda F6C Valkyrie. Connecting this adapter is simple and it will allow your Pathfinder lights to operate in driving light and turn signal mode! The adapter comes complete with everything you need for a quick and easy installation on your Valkyrie!

  • Part#: A-RM1

    This adapter will allow you to easily install the AdMore Light Bar on your Indian motorcycle. We use the same high-end, expensive Delphi connectors found on your bike (which is why this adapter is so expensive!) so that installation is a breeze! The adapter comes complete with everything you need for a quick and easy installation on your Indian motorcycle!

  • CASE: GIVI B37

  • CASE: GIVI B47

  • CASE: GIVI V35 (red turn indicators)

  • CASE: GIVI V35 (amber turn indicators)

  • CASE: GIVI E41 (red turn indicators)

  • CASE: GIVI E41 (amber turn indicators)

  • CASE: GIVI V46 (side arrays)

  • CASE: GIVI V46 (center LED panel)

  • CASE: GIVI V47, Array type: "RY"

  • CASE: GIVI V47, Array type: "CG"

  • CASE: GIVI E52

  • CASE: GIVI E55, Array type: "RY"

  • CASE: GIVI E55, Array type: "CG"

  • CASE: GIVI V56 (CP)

  • CASE: GIVI V56

  • CASE: GIVI E360/E460 (red turn indicators)

  • CASE: GIVI E360/E460 (amber turn indicators)

  • CASE: GIVI E370 (red turn indicators)

  • CASE: GIVI E370 (amber turn indicators)

  • CASE: GIVI E470

  • CASE: SHAD SH36

  • CASE: SHAD SH39

  • CASE: SHAD SH48, Array type: "CG"

  • CASE: SHAD SH48, Array type: "RY"

  • CASE: SHAD SH50

  • CASE: CooCase S48/S50

  • CASE: Suzuki 48L

  • CASE: Vespa 42L

  • Univeral 4014 array (red turn indicators)

  • Univeral 1614 array (amber turn indicators)

  • Front-facing 2711 array

  • Please Contact Us for the availability of this product.

  • Invalid Selection

    LED55-T-TS kit unavailable with common ground harness and rectangular connector.

  • See All Motorcycle Plug-N-Play adapters here

  •  

  •  See All Our Parts Products Here 

  • Should be Empty: