• Order Form

    Completion time may vary depending on order volume. We aim to complete all files within a maximum of 5 business days. Providing incorrect information may add an ADDITIONAL 7 days.
  • IMPORTANT FILE INFORMATION

    Changing a file type (Shift on the Fly to a Single Horsepower File, Single Horsepower File to Shift on the Fly, as well as requesting a different power level for a single tune option) will result in an additional charge. Be sure the file you select on your form is what you want on your vehicle.
  • IMPORTANT NOTICE, PLEASE READ BEFORE CONTINUING:

    SOME MM3 Devices have been overheating when going through the flashing process on the vehicle. MM3 is aware of the issue and working on a fix. It is not every device that is having this issue. If you encounter ERROR 1: please store the MM3 Monitor in a cool place (such as a refridgerator) for 30-60 minutes before flashing your vehicle.

    If you experience any issues with the device not communicating with the vehicle, please call us at 877-223-5018 Option 1.

    Thank you!

  • Commander Credits

    EVERY NEW Commander comes with 8 credits loaded on the device. Below are the required credits for each vehicle:

    • 2020-2022 6.7L Powerstroke ECM FLASH - 8 Credits
    • 2022-2024 6.7L Powerstroke OBD FLASH - 4 Credits
    • 2017-2023 6.6L L5P Duramax - 8 Credits
    • 2017-2023 6.6L L5P Duramax ECM UNLOCK - 4 credits
    • 2020-2022.5 3.0L LM2 - 6 Credits
    • 2020-2022.5 3.0L LM2 ECM UNLOCK - 8 Credits

    If you need to purchase more credits please reach out to the dealer you purchased your device from.

  • SCT Strategy

    • 6.0: will start with VXA..., VXB..., VXC...
    • 6.4: will start with TQJE... or TQJF...
  • 2022 Power Stroke Disclaimer

    This product is intended for 2022 Ford vehicles and attempts to maintain stock power levels. It may lead to a loss of MPG. Modifications to increase power require swapping the ECM to a 2020-2021 model. No additional power enhancements are supported.

  • For instructions on how to pull the ECM and TCM serial numbers, please use the instructions from the URL(s) below:

    • GDP Commander Instructions
    • Latest Commander/Autoflasher Software Download
    • *NEW* Video How to pull info for 2020-2021 Ford
    • *NEW* Video How to pull info for 2022 Ford BENCH Flash 2020-2021 ECM
    • *NEW* Video How to pull info for 2022 Ford OBD Flash Stock ECM
    • *NEW* Video How to pull info for 2023-2024 Ford OBD Flash Stock ECM
  • How To Get ECM Serial Number For L5P

  • IMPORTANT:

    When swapping out the ECM from a 2022 to a 2020-2021 ECM, you must put the 2020-2021 ECM Serial number in the form. If this is incorrect, you will be charged for a file to be rebuilt.

  • ECM Serial Number Through OBD2 On 2022 Ford

  • ECM Serial Number Through OBD2 On 2023-2024 Ford

  • 6.7L Power Stroke TCM Tuning

    If you buy directly from GDP, your transmission tuning is a separate purchase and will include a SEPARATE PREORDER NUMBER That you will enter below. If you have purchased from a dealer of GDP and have transmission tuning included with your purchase from them, please select YES below and enter the SAME PREORDER NUMBER used above for ECM Tuning.

  • TCM Serial Number Through OBD2 On Ford

  • Image-73
  • Active Grill Shutters

    We will typically leave active grill shutters turned on, unless you know you do not have them. The only issue this will cause if you do not have active grill shutters, is your fan will continously run. If you experience this issue, please give us a call and we will fix it.

  • For instructions on getting info for a 2022+ Cummins please refer to instructions below:

    • *NEW* Video How to pull info for 2022-2024 Cummins
  • IMPORTANT NOTE:

    HISS and RUMBLE Files are ONLY options for SOTF files on the GDP Commander.

  • If your vehicle is any of the following, we will need the vehicle info suite file:

    • 2020+ 6.6l L5P Duramax (Recommended as their can be codes from Operating Systems Mismatching)
    • 2003-2010 6.7l Powerstroke

    That can be retrieved by doing the following After the file has been retrieved, please attach it to the file box found at the bottom of this page:

    How To Generate VCM Info Log

  • EFI & HPTuners

    For 01-10 GM Cab Chassis, Manuals, or Dual Tanks, you MUST upload a read from the vehicle
  • MM3

    For 2003-2009 Cummins, you MUST upload a read from the vehicle.
  • MM3 Stock File

    It is highly recommended that you include a stock file for best results from your tuning.
  • Browse Files
    Drag and drop files here
    Choose a file
    Cancelof
  • Browse Files
    Drag and drop files here
    Choose a file
    Cancelof
  • Browse Files
    Drag and drop files here
    Choose a file
    Cancelof
  • Browse Files
    Drag and drop files here
    Choose a file
    Cancelof
  • Browse Files
    Drag and drop files here
    Choose a file
    Cancelof
  • Browse Files
    Drag and drop files here
    Choose a file
    Cancelof
  • Browse Files
    Drag and drop files here
    Choose a file
    Cancelof
  • See below for example of the ECM Label.

  • Image-192
  • Important Disclaimer:

    Do not complete the ECM swap procedure before receiving your tune files.
  • Remote Support Fee – $75 CAD per VIN

    Need help loading files to your computer or vehicle? We offer remote support via AnyDesk. A $75 support fee applies per VIN for our team to assist you remotely.

    NOTE: If you are unsure if you will need help, this fee can be paid later.

  • You can continue filling out this form before or after paying, but you must use the link below to pay: 

    Click Here to Pay Remote Tech Support Fee

     

  • prevnext( X )
      Expedited FileExpress File (Within 4 Hours)
      $200.00CAD
        
      Total
      $0.00CAD
      Credit Card
    • PLEASE DOUBLE CHECK YOUR FORM. INCORRECT INFORMATION WILL RESULT IN YOUR FORM BEING DENIED AND NEEDING TO BE FILLED OUT AGAIN.

    • Should be Empty: