NASA Contingency Compliance Form

Contingency Compliance Form

Complete this form once during the race weekend for each contingency you would like to claim and attach it to your contingency redemption submission.
Important: In an effort to improve contingency program processes and to ensure that all vehicles and drivers are compliant with the contingency requirements, all contingency compliance forms that are filled out at the track must be filled out the same day or a day before you are trying to claim a contingency. See the FAQ for common questions and answers.
Driver's Information and Region
Driver Name*

First NameLast Name
Email*

Confirmation Email
NASA Region*
Today's Date*

MonthDayYear
Compliance Check

To be completed by a NASA official at the track.
Select Contingency Program*
Tech Verification Item(s) - AST Suspension*

Four (4) AST Suspension decals are required on the car, placed one (1) on each side, one (1) on front, and one (1) on rear.
Tech Verification Item(s) - ApexPro*

Two (2) ApexPro decals are required on the car. One decal must be used on each front fender.
Tech Verification Item(s) - BFGoodrich Tires*

BFGoodrich R1, R1-S, Rival-S, Sport Comp-2 or KDW-R tires on all four wheel positionsThree (3) BFGoodrich tires decals - One decal must be used on each front fender- 18″ wide minimum along with one 18″ wide minimum decal being used on the front bumper cover, hood, or windshield bannerBFGoodrich driver suite patch located on a torso of driver's suiteNo competing tire decals or patches may be present on car or driver's suit
Tech Verification Item(s) - Brake Parts Inc. / Raybestos*

Two (2) Raybestos decals are required on the car. One decal must be used on each front fender.
Picture of the Vehicle Showing the Raybestos Brakes Decals in Place During the Event*

Browse Files
You can take a picture with your smartphone Cancelof
Tech Verification Item(s) - Condor Speed Shop*

Two (2) Condor Speed Shop decals are required on the car, placed one (1) on each side.
Tech Verification Item(s) - Ford Performance*

2005+ Ford Mustang or 1999+ Ford FocusTwo (2) Ford Performance Decals are required on the car, placed on each side of the vehicle.Ford Performance Patch on upper right chest.
Tech Verification Item(s) - Frozen Rotors*

Two (2) Frozen Rotors decals are required on the car, placed on the driver and passenger side front fenders.No competing rotor supplier decals may be present on car.
Tech Verification Item(s) - DG-Spec*

Four (4) DG Spec decals are required on the car, placed on each side of the car
Tech Verification Item(s) - G-Loc Brakes*

Four (4) G-Loc decals are required on the car, placed one (1) on each side, one (1) on the front and one (1) on the rear.NO Competitor Brake Decals are Present (Hawk, Raybestos, Wilwood, etc...)
Tech Verification Item(s) - HAWK Performance*

Four (4) HAWK Performance decals are required on the car, placed one (1) on each side, one (1) on front, and one (1) on rear.
Tech Verification Item(s) - Injector Pulse*

Two (2) Injector Pulse decals are required on the car, placed on the driver and passenger side front fenders
Tech Verification Item(s) - Motion Control Suspension*

Four (4) Motion Control Suspension decals are required on the car, placed one (1) on each side, one (1) on front, and one (1) on rear.
Tech Verification Item(s) - Maximum Motorsports*

Stickers must be placed on each front fender, the front fascia, and the rear of the car.Fender stickers: Must be located forward of the front wheel centerline, unless the sticker is the large MM sticker (5.5” by 20”) affixed to the fender as 10” wide by 12” tall, and is located on the fender immediately behind the wheel opening.Front sticker: Must be placed on the front fascia, must be located closer to the center of the car than to the front corner of the car, and must be visible and readable in a photograph.Rear sticker: Must be placed on the rear of the bodywork, not the rear window, and must be prominently visible to a camera located inside the cabin of a car following at a distance of three feet.
Tech Verification Item(s) - Öhlins Suspension*

Four (4) Öhlins Suspension decals are required on the car, placed one (1) on each side, one (1) on front, and one (1) on rear.
Picture of the Vehicle Showing the Maximum Motorsports Decals in Place During the Event*

Browse Files
You can take a picture with your smartphone Cancelof
Tech Verification Item(s) - Maxxis Tires*

Maxxis RC-1 or VR-1 or R-19 Tires on all four wheel positionsFour (4) Maxxis tires decals - placed on the driver and passenger side front fenders and front and rear bumpersMaxxis tires driver suit patch located on a torso of driver's suiteNo competing tire decals or patches may be present on car or driver's suit
Tech Verification Item(s) - NEO Motorsport*

Two (2) NEO Motorsport decals are required on the car, placed on the driver and passenger side front fenders
Tech Verification Item(s) - Nissan Motorsports*

Three (3) Nissan Motorsports decals are required on the car, one on each side of the vehicle, one on the front of the vehicle either the front air dam, hood, or top of windshieldNissan/Nismo driver suit patch located on a torso of driver's suit
Picture of the Vehicle Showing the Nissan Motorsports Decals in Place During the Event*

Browse Files
You can take a picture with your smartphone Cancelof
Tech Verification Item(s) - OS Giken USA*

Two (2) OS Giken USA decals are required on the car, placed underneath each headlight
Picture of the Vehicle Showing the OS Giken USA Decals in Place During the Event*

Browse Files
You can take a picture with your smartphone Cancelof
Tech Verification Item(s) - P2R Power Rev Racing*

Two (2) P2R Power Rev Racing decals are required on the car, placed (1) on each side.
Tech Verification Item(s) - Racepak*

Two (2) Racepak decals are required on the car, placed on the driver and passenger side front fenders
Tech Verification Item(s) - Remmen Brakes*

Two (2) Remmen Brakes decals are required on the car, placed on the driver and passenger side front fenders
Tech Verification Item(s) - Sampson Racing Communications*

Two (2) Sampson Racing Communications decals are required on the car, placed (1) on each side.Sampson Racing Communications System utilized in car
Tech Verification Item(s) - Spec Clutches*

Two (2) Spec Clutch decals are required on the car, placed (1) on each side.No competing clutch supplier decals may be present on car.
Picture of the Vehicle Showing the Remmen Brakes Decals in Place During the Event*

Browse Files
You can take a picture with your smartphone Cancelof
Tech Verification Item(s) - Toyo Tires Tires*

Toyo Tires on all four wheel positionsFour (4) Toyo Tires decals - One decal must be prominently placed on each side and on the front and rear of the vehicleNo competing tire decals or patches may be present on car or driver's suit
Tech Official's Name*

First NameLast Name
Tech Official's NASA Member Number*
Must be a real NASA member number
Tech Official's Signature*

Clear
A copy of this form will be emailed to you in PDF format. Please attach it to your contingency redemption submission.
Should be Empty:

Contingency Compliance Form

Driver's Information and Region

Compliance Check