• Warranty Claim Form

  • PLEASE READ BEFORE INSTALLATION

  • WARNING: ALL OIL & LUBRICATING FLUID HAS BEEN DRAIN & FILTERS HAVE BEEN REMOVED!

    Please fill oil to the Manufacturer's Specifications before operation or use of this part/assembly. The replacement of gaskets, seals, and filter(s) should be performed before the addition of fluid.
  • Thank you for purchasing this quality recycled automotive part. Not only have you saved a considerable amount of money over a new part, but you are helping the environment by recycling. Prior to the installation of your recycled auto part, we suggest that you perform the following pre-installation maintenance. By performing the pre-installation maintenance you will prolong the life of your recycled part and protect its warranty. This part comes with a warranty under normal driving conditions. Engines are guaranteed against engine knock and excessive smoking and/or oil burn. Transmissions are guaranteed against failure of any internal parts including the torque converter. Other accessories, such as alternators, starters, carburetors, distributors, fuel pumps, water pumps, etc. are not covered under this limited warranty unless otherwise noted on your sales receipt. For complete warranty information, please refer to our website or the back of your sales receipt.

  • ENGINE PRE-INSTALLATION MAINTENANCE

    Removal of Harmonic Balancer and/or rotation of the Engine backward may cause damage and potentially void all warranties. When interchanging between years and models, it may be necessary to change certain Bolt-On Accessories, Sensors, Wiring, etc. as needed.
  • ***PLEASE BE SURE TO CHECK THE ITEMS ABOVE THAT WERE DONE DURING PRE-INSTALLATION! IF ANY STEP IS NOT APPLICABLE OR WAS NOT DONE, DO NOT CHECK THAT STEP OFF!***

  • TRANSMISSION PRE-INSTALLATION MAINTENANCE

    When interchanging between years and models, it may be necessary to change Linkages, Sensors, Speedometer Gears, Wiring, etc. as needed.
  • ***PLEASE BE SURE TO CHECK THE ITEMS ABOVE THAT WERE DONE DURING PRE-INSTALLATION! IF ANY STEP IS NOT APPLICABLE OR WAS NOT DONE, DO NOT CHECK THAT STEP OFF!***

  • TRANSFER CASE, CARRIER & AXLE ASSEMBLY PRE-INSTALLATION MAINTENANCE

    When interchanging between years and models, it may be necessary to change Covers, Sensors, Wiring, etc. as needed.
  • ***PLEASE BE SURE TO CHECK THE ITEMS ABOVE THAT WERE DONE DURING PRE-INSTALLATION! IF ANY STEP IS NOT APPLICABLE OR WAS NOT DONE, DO NOT CHECK THAT STEP OFF!***

  •  / /
  • Clear
  •  
  • Should be Empty: